To: 'Mark Pride'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 issues - new modules installed - 250 Hz
filter,DVK, KXV3A
I forgot to mention- the DSP error messages- you had to disassemble the
front panel assembly to install the DVK. You may not have that stack
properly re-assembled
Hello all,
Ran into some issues with the K3 after adding some new boards. Here is the
sequence of screens on the radio as I move to get it going again.
Few more experiences - And added some more notes in the first email below.
On SSB, it transmits okay, no ERR on screen. When I just send a
Of Mark
Pride via Elecraft
Sent: Friday, May 23, 2014 7:22 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 issues - new modules installed - 250 Hz filter,
DVK,KXV3A
Hello all,
Ran into some issues with the K3 after adding some new boards. Here is the
sequence of screens on the radio as I
,
Bruce N1RX
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark
Pride via Elecraft
Sent: Friday, May 23, 2014 7:22 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 issues - new modules installed - 250 Hz filter,
DVK,KXV3A
Hello all,
Ran into some
4 matches
Mail list logo