[Elecraft] K3 latest firmware

2009-08-13 Thread Barry Simpson
I have just loaded the latest firmware. The NR is certainly different and appears to be a big improvement although at aggressive settings the audio output is very attenuated. There is another effect which doesn't seem to have been published. That is the maximum output that can be set by

Re: [Elecraft] K3 latest firmware

2009-08-13 Thread Stephen Prior
Barry, The power dropped to 110W with the previous public beta I think, in the interest of spectral purity as I recall. 73 Stephen G4SJP K3 #980 On 13/08/2009 12:10, Barry Simpson vk...@optusnet.com.au wrote: I have just loaded the latest firmware. The NR is certainly different

Re: [Elecraft] K3 latest firmware

2009-08-13 Thread K2QI
Barry, the power level was dropped to 110 some time ago. Also, F3-4 and F4-4 are for instances of high signal ratio and noise; i.e. strong S9+ signals with high noise levels. It is still recommended to Use F1 and F2 settings for the best results. 73 de James K2QI On Thu, Aug 13, 2009 at 7:10

Re: [Elecraft] K3 latest firmware

2009-08-13 Thread Brett Howard
Actually it was published in the Firmware release notes... There is another effect which doesn't seem to have been published. That is the maximum output that can be set by the power control is now 110 watts instead of 120 watts. Barry Simpson  VK2BJ

[Elecraft] K3 - Latest firmware (last nite) FM test results, not good for U.S.

2008-05-05 Thread J. Heide
I brought the K3 (#722) to work today once again, this time to check the FM operation of the radio. I had calibrated the oscillator a couple of weeks ago, and it has only drifted 16Hz since then! Measurements taken on the same equipment, same freq standard Motorola 2670, Spectracom 8195A. My FM

[Elecraft] K3 - Latest firmware (last nite) FM test results, not good for U.S.

2008-05-05 Thread Dave G4AON
Josh Elecraft need to see how other manufacturers configure their transceivers... The TS480, which covers the same bands as a K3, has wide/narrow TX deviation which toggles between the two when the FIL/Nar button is held down, this switches between 2.5 KHz and 5 KHz maximum deviation and

Re: [Elecraft] K3 - Latest firmware (last nite) FM test results, not good for U.S.

2008-05-05 Thread G4ILO
Dave G4AON wrote: Elecraft need to see how other manufacturers configure their transceivers... The TS480, which covers the same bands as a K3, has wide/narrow TX deviation which toggles between the two when the FIL/Nar button is held down, this switches between 2.5 KHz and 5 KHz maximum

re: [Elecraft] K3 - Latest firmware (last nite) FM test results, not good for U.S.

2008-05-05 Thread Joe Stofko
Sorry for the last incomplete post. Josh, K6ZRX wrote: - My FM measurements were as follows: Frequency was 52.525, did not check 10 meters. 12Db SINAD .47uV -113.4dBm Looses squelch (13) takes .79uV -109.0dBm to break Squelch closes at .33uV -116.5dBm Max modulation acceptance 4.90kHz TX CTCSS