Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-05-26 Thread Bruce Hammond
Wayne's macro for ATU inline and bypass helped me easily go back to QRP or 100w after switching off the KPA500 (already had a macro on PF1/PF2 for 5w and 100w, just could not figure out how to handle ATU definitively.) I would like to find a way to automatically place ATU in bypass when the

[Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Wayne Burdick
Someone recently asked me how to use switch macros to definitively set the ATU to normal or bypass mode. Using a switch-emulation command just alternates between the two--you don't know what the ATU's state is without looking at the display icon. Here are two unambiguous command sequences:

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Arie Kleingeld PA3A
Wayne, I sure would like to do this with the RX antennas. Please? 73 Arie PA3A Op 28-2-2012 16:52, Wayne Burdick schreef: Someone recently asked me how to use switch macros to definitively set the ATU to normal or bypass mode. Using a switch-emulation command just alternates between the

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread iain macdonnell - N6ML
How about a definite way to switch RX ANT on/off ? D'oh! Arie beat me to it. I think there are a few others .. Noise Reduction, perhaps? I really need to make a list ;) ~iain / N6ML On Tue, Feb 28, 2012 at 7:52 AM, Wayne Burdick n...@elecraft.com wrote: Someone recently asked me how to

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Wayne Burdick
This will require a new command. I've added it to the firmware list. tnx Wayne N6KR On Feb 28, 2012, at 9:22 AM, Arie Kleingeld PA3A wrote: Wayne, I sure would like to do this with the RX antennas. Please? 73 Arie PA3A Op 28-2-2012 16:52, Wayne Burdick schreef: Someone recently asked

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Joe Subich, W4TV
While you're at it, please include control of the Sub RX RX Ant (RX Ant Hold). 73, ... Joe, W4TV On 2/28/2012 12:26 PM, Wayne Burdick wrote: This will require a new command. I've added it to the firmware list. tnx Wayne N6KR On Feb 28, 2012, at 9:22 AM, Arie Kleingeld PA3A wrote:

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Wayne Burdick
QSL. Wayne On Feb 28, 2012, at 9:51 AM, Joe Subich, W4TV wrote: While you're at it, please include control of the Sub RX RX Ant (RX Ant Hold). 73, ... Joe, W4TV On 2/28/2012 12:26 PM, Wayne Burdick wrote: This will require a new command. I've added it to the firmware list. tnx

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Nick-WA5BDU
While we're wishing, I'd hoped to have macros for when using my relay switched AL-811: QSK: off, VOX: off, TX Dly: 012, PWR: 60W And Normal QSK: on, VOX: on, TX Dly: 008, PWR: 100W Looks like the TX Dly might be do-able, Power certainly is, but not the QSK and VOX items. 73, Nick, WA5BDU

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Bill
I must be dumb - I don't get why you need a macro to turn the tuner on and off? There is a perfectly good switch for that already on the K3. Bill W2BLC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] K3 macro to put ATU in norm/bypass mode

2012-02-28 Thread Wayne Burdick
From a PC application. 73, Wayne N6KR On Feb 28, 2012, at 5:13 PM, Bill wrote: I must be dumb - I don't get why you need a macro to turn the tuner on and off? There is a perfectly good switch for that already on the K3. Bill W2BLC