There are some very useful little applications being developed out
there by the K3 user community. I'd just like to plant a seed for a
potential new application to augment the limited display of the K3.
How about a simple application that would be a full-time display of
various K3 settings that
The problem on a Windows box is sharing the comm port with another
application.
73, Mike NF4L
Barry N1EU wrote:
There are some very useful little applications being developed out
there by the K3 user community. I'd just like to plant a seed for a
potential new application to augment the
On Dec 10, 2009, at 6:26 AM, Mike wrote:
The problem on a Windows box is sharing the comm port with another
application.
Which is a very good reason for supporting the K3 as a network addressable
device. Each K3 should have its own IP address.
73, Mike NF4L
Barry N1EU wrote:
If you want to share the K3's serial port, LP-BRIDGE does a great job. I
use Kcomm, PowerSDR-IF, EasyPal, Digipan at the same time (if a needed sound
card is available - I have 2 so far).
If you need more serial ports on your PC, I've found that PCI Express cards
are a good - though expensive
This problem has already been addressed by N8LP and that's why I
specifically mentioned LP-Bridge in my original post. The
availability of LP-Bridge is precisely what opens up the possibility
(and power) of using a simple display application like I described to
address the K3's limited display
Exactly...and it works GREAT for this exact purpose.
Other than the K3 Utility which is a necessity, I think LPB is the single most
useful
piece of software out there that supports the K3.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
On Thu Dec 10 6:59 , Barry N1EU
Hi Barry,
I'm working on an app similar to what you describe. It will be similar to
K3-EZ, but instead of having all of the various options in a tab panel in one
window, there will be a number of 'mini' apps that can each be displayed in
it's own window. This will allow the user to pick which
I'll go look at LP-Bridge. Thanks for the tip.
Mike
Monty Shultes wrote:
If you want to share the K3's serial port, LP-BRIDGE does a great
job. I use Kcomm, PowerSDR-IF, EasyPal, Digipan at the same time (if
a needed sound card is available - I have 2 so far).
If you need more serial
: elecraft; Barry N1EU
Subject: Re: [Elecraft] K3 software utility needed
On Dec 10, 2009, at 6:26 AM, Mike wrote:
The problem on a Windows box is sharing the comm port with another
application.
Which is a very good reason for supporting the K3 as a
network addressable
device. Each
:44 AM
To: Monty Shultes
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 software utility needed
I'll go look at LP-Bridge. Thanks for the tip.
Mike
Monty Shultes wrote:
If you want to share the K3's serial port, LP-BRIDGE does a great
job. I use Kcomm, PowerSDR
: [Elecraft] K3 software utility needed
To: elecraft Elecraft@mailman.qth.net
Date: Thursday, December 10, 2009, 9:59 AM
This problem has already been
addressed by N8LP and that's why I
specifically mentioned LP-Bridge in my original post.
The
availability of LP-Bridge is precisely what opens
of applications requesting data.
73,
Larry N8LP
Date: Thu, 10 Dec 2009 12:24:57 -0500
From: Joe Subich, W4TV li...@subich.com
Subject: Re: [Elecraft] K3 software utility needed
To: n...@nf4l.com, 'Monty Shultes' mon...@mindspring.com
Cc: 'elecraft@mailman.qth.net' Elecraft@mailman.qth.net
Message
12 matches
Mail list logo
