Udo,
Do you have MCU firmware 5.33 or later loaded?
Did you set the PTT-KEY menu to use "UNSAFE" mode (or activate PTT-KEY
by other means).
See the Firmware Release Notes for MCU version 5.33 dated 8-03-2015 for
the full explanation.
73,
Don W3FPR
On 12/6/2017 12:52 PM, Udo Langenohl -
on behalf of Udo Langenohl - DK5YA
<dk...@dk5ya.de>
*Sent:* Monday, December 4, 2017 9:11 AM
*To:* Elecraft Reflector
*Subject:* [Elecraft] K3 suffers from amnesia
I pimped both of my K3 with the new KIO3B boards in order to avoid that
nasty sound card cabeling etc. It works fine via U
Udo,
Are you using the POWER switch to turn the K3 off?
If you turn off the power supply instead, the K3 will not save any
recent menu changes nor the current band/mode/frequency.
73,
Don W3FPR
On 12/4/2017 11:11 AM, Udo Langenohl - DK5YA wrote:
I pimped both of my K3 with the new KIO3B
7 9:11 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 suffers from amnesia
I pimped both of my K3 with the new KIO3B boards in order to avoid that
nasty sound card cabeling etc. It works fine via USB but one strange
thing happens with both radios.
I have to set "PTT-KEY" to RTS-DTR every ti
I pimped both of my K3 with the new KIO3B boards in order to avoid that
nasty sound card cabeling etc. It works fine via USB but one strange
thing happens with both radios.
I have to set "PTT-KEY" to RTS-DTR every time after powering down and
power up the radio again. Both K3 forget the
5 matches
Mail list logo