all
reed relay from information gathered in the Kenwood AT300
manual... But I bet Phil AD5X beats me to this (I have his
ALS600 QSK relay mod installed and it is WONDERFUL!)
Regards
Lu - W4LT
Message: 6
Date: Mon, 21 Dec 2009 10:02:31 -0800
From: "Jim Brown"
Subject: Re: [Elecraft] K
Jack - I've been using my K3 with my ALS-600 for about 18 months now. My
ALS-600 takes 65 watts drive to get full output, so I just put a 2dB
attenuator in-line whenever the amp is turned on (relays switch in the
attenuator automatically). That way I can leave my transmit power always
set to
On Mon, 21 Dec 2009 08:20:32 -0800 (PST), w4grj wrote:
>I am hooking up my new K3 to a ALS600 and would appreciate comments from
>anyone with this combo concerning connecting without ALC control and any
>relay delay settings in the K3
In general, ALC should NEVER be used to set drive level -- doi
Using K3 + ALS600. About 40 Watts in gets about 425 Watts out from 2.3 to
4.1 MHz. No ALC. TX DLY = 020.
Steve, W2MY
-Original Message-
On Behalf Of w4grj
I am hooking up my new K3 to a ALS600 and would appreciate comments from
anyone with this combo concerning connecting without ALC
I am hooking up my new K3 to a ALS600 and would appreciate comments from
anyone with this combo concerning connecting without ALC control and any
relay delay settings in the K3
Jack W4GRJ
--
View this message in context:
http://n2.nabble.com/K3-to-ALS600-Amplifier-tp4199219p4199219.html
Sent f
5 matches
Mail list logo
