The low end response of the stock K3 is limited by coupling capacitor
impedance in the audio stage.
73,
Barry N1EU
Lyle Johnson wrote:
What I would like to know is just what the ACTUAL response curves of
the K3 transmit and receive audio are (when all EQ settings are set to
'0',
, June 17, 2009 8:13 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 transmit and receive audio response
The low end response of the stock K3 is limited by coupling
capacitor impedance in the audio stage.
73,
Barry N1EU
Lyle Johnson wrote:
What I would like
Hello everyone,
I had a chance at Dayton this year to chat with the Elecraft honchos,
and had every one of my K3 questions answered. Thanks, gentlemen.
Meanwhile, a few hours ago, Wayne had written:
{While I'm on this topic, I'd also like to suggest using a minimum of
both RX and TX EQ. The
What I would like to know is just what the ACTUAL response curves of
the K3 transmit and receive audio are (when all EQ settings are set to
'0',
Flat means the EQ does not add or subtract to the filter response dialed
in by the operator with the SHIFT/WIDTH/HIGH CUT/LOW CUT controls. The
...And, for transmit, is the internal RF
speech processor applied pre or post of the frequency response
shaping circuitry?
Frequency shaping (Tx EQ) is done at audio, speech processing is done at
I.F.
73,
Lyle KK7P
__
Elecraft
5 matches
Mail list logo