Please add my name to that list as a feature req for the KX3.
Channel hopping (scan) pause = x seconds/off.
By comparison, the ft-817 uses 3/5/10 seconds as scan resume options + OFF.
The kx3 resumes fairly quick after it stops on a signal. I never used
scanning on HF but it comes in handy scannin
Hi Don:
Thanks for the reply. I am aware of the scan speed.
It would be nice to configure the Scan 'Pause' delay.
73 de Jose
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/
There is no specific Scan Delay,
But the speed of scanning depends on the VFO rate. See page 42 of the
K3S manual.
73,
Don W3FPR
On 12/26/2017 10:57 PM, jollyto wrote:
How I can set the scan delay when a signal is found?
I would like a longer delay time on the scan function when a signal is
"How I can set the scan delay when a signal is found?...(etc.)"
Dang it, I thought I saw that once in Fred's book or the manual -- now
cain't find it either. Will try again...
73, Roy K6XK
__
Elecraft mailing list
Home:
How I can set the scan delay when a signal is found?
I would like a longer delay time on the scan function when a signal is
detected.
Thanks
73 de KP4FMD - K3s #10,554
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft ma
5 matches
Mail list logo