You were quite clear, at least to me. The answer is YES. The normal
setup is the K3 AUX goes to the XCVR jack on the KAT500. It gets
frequency info. *If* you have a KPA500, another such cable connects
from the KAT500 to it. If you don't have a KPA500, that connector is
empty. Does that
turday, December 17, 2016 4:44 PM
To: Dick Dievendorff<mailto:d...@elecraft.com>;
elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
Subject: Re: [Elecraft] KAT500 without KPA500
I seem not to have made myself very clear. Let's leave the amp (both
the AL-80A and the KPS500 out of
de Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of George
Kidder
Sent: Saturday, December 17, 2016 08:09
To: elecraft@mailman.qth.net
Subject: [Elecraft] KAT500 without KPA500
I am considering purchase of the KAT500 to use with my K3
, December 17, 2016 08:09
To: elecraft@mailman.qth.net
Subject: [Elecraft] KAT500 without KPA500
I am considering purchase of the KAT500 to use with my K3 and an old AL-80A,
with a view to future expansion to the KPA500. Is there any reason why an
Auxbus cable direct from the K3 to the KAT500 would
From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of George Kidder
<gkid...@ilstu.edu>
Sent: Saturday, December 17, 2016 9:09 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KAT500 without KPA500
I am considering purchase of the KAT500 to use with my K3 and an old
AL-80A,
I am considering purchase of the KAT500 to use with my K3 and an old
AL-80A, with a view to future expansion to the KPA500. Is there any
reason why an Auxbus cable direct from the K3 to the KAT500 would not
provide the necessary band and frequency information?
George, W3HBM
6 matches
Mail list logo