For those who are interested, here is more info on what I did:
see http://home.pacbell.net/johngreb/KI6WX.html
I followed the "Splitting A K2/100..." instructions and added a resistor at the
input of the KPA. I used a 300 Ohm 2W resistor leftover from the KPA upgrade
kit :)
I forgot to mention
After some more searching through various cures online, I think I have fixed
it. I added a 300 ohm 2W resistor to the input, that seemed to stop the problem.
Tor
N4OGW
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
> the K2 to reset and/or show the hi-swr warning. Twice I have managed to blow
> the
> microprocessor in the KIO2 attached to this K2!
>
Meant to say that I have blown the cpu in the KRC2 twice...
Tor
N4OGW
___
Elecraft mailing list
Post to: Elecraf
I've been fighting an oscillation problem with one of my K2/100's for a few
years now. My other K2/100 does not have the problem at all. Here is what
happens:
Specifically on 7 MHz and when connected to an ICE model 419 bandpass filter,
the KPA-100 has some kind of oscillation. I can tell it is
4 matches
Mail list logo