Hi All,
A short while ago there were a number of people interested in toggling
macros. Also the limit of 16 was mentioned.
I have a Kpod and been playing with it software wise after some help
from Elecraft developer N6HZ Paul.
When the Kpod is connected to via the USB port the normal radio
Hi all,
The Kpod currently has no facility to do much more than initiate a key
tap / hold with no facility to interrogate.
This I believe will all change when the ability to control the PC
feature is enabled / built as then PC applications can be built to send
what ever command is required to
st <elecraft@mailman.qth.net>
Sent: Tuesday, May 2, 2017 7:57 PM
Subject: Re: [Elecraft] KPOD toggle macros?
#yiv6913377253 #yiv6913377253 -- P
{margin-top:0;margin-bottom:0;}#yiv6913377253 A work around is to make the two
macros as you do now (chaining one to the other), assign them
From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Harry Yingst via
Elecraft <elecraft@mailman.qth.net>
Sent: Tuesday, May 2, 2017 4:04 PM
To: Jim Miller; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPOD toggle macros?
I'm still waiting for the same thi
ay 2, 2017 4:04 PM
To: Jim Miller; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPOD toggle macros?
I'm still waiting for the same thing, I think a part of it is that the k3 does
not haveenough macros as each one of the 16 are already assigned to the KPOD
buttons.
From: J
Sent: Tuesday, May 2, 2017 5:34 PM
Subject: [Elecraft] KPOD toggle macros?
I'm finally back to working with my KPOD and some macros.
Has anyone figured out how to do a toggle similar to what can be done on the K3
front panel?
I have a toggle on the K3 for doing my split up1 sequence an
Jim,
That is "tricky and potentially dangerous".
The problem with toggles is that Macros do not know the current state of
things, and the state cannot be interrogated using Macros because Macros
do not include "IF Then" logic. If you are looking at the display you
can usually tell the
I'm finally back to working with my KPOD and some macros.
Has anyone figured out how to do a toggle similar to what can be done on the K3
front panel?
I have a toggle on the K3 for doing my split up1 sequence and a second
activation turns it all off.
I'm looking to toggle DIGOUT1 which will
8 matches
Mail list logo