Good Day All,
I'm attempting to connect my old J-38 to my newly-acquired KX-1
without success. Other than setting the input menu to hnd, is there
something else I should be doing? I'm using an old stereo cable with a
1/8 plug for the connection. When I plug it in, I get a continuous
tone
John,
That sounds like you could have a shorted cable. Unplug it from the KX1
and check between the tip and the shell with your ohmmeter.
You did say old J38 - if it has been sitting around for a while, maybe
it has developed a short somewhere.
If you have the J-38 on its original base, did
To: Elecraft@mailman.qth.net
Sent: Tuesday, July 12, 2011 1:25:58 PM
Subject: [Elecraft] KX-1 and J-38 hookup?
Good Day All,
I'm attempting to connect my old J-38 to my newly-acquired KX-1
without success. Other than setting the input menu to hnd, is there
something else I should be doing? I'm
Thanks. Perhaps I misidentified the key. There's no shorting bar on
this one--just the two terminal posts.
~John
On Tue, Jul 12, 2011 at 1:25 PM, John Flynn gio.fl...@gmail.com wrote:
Good Day All,
I'm attempting to connect my old J-38 to my newly-acquired KX-1
without success. Other than
OK, your comments helped me figure it out. What I have a is
three-conductor cable. By swapping the various wires around, I found
the two that worked. It ain't pretty, but :-) Now to get the
two-conductor version.
73
~John KK4BOB
On Tue, Jul 12, 2011 at 1:25 PM, John Flynn
Sent: Tuesday, July 12, 2011 10:51 AM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX-1 and J-38 hookup?
Thanks. Perhaps I misidentified the key. There's no shorting bar on
this one--just the two terminal posts.
~John
On Tue, Jul 12, 2011 at 1:25 PM, John Flynn gio.fl...@gmail.com wrote
6 matches
Mail list logo