Should have added that the problem continues even with no key installed.. I have since reseated the MCU but it still continues to transmit "dahs" when I turn on the power with no key installed.
Read in the archives that another ham had the same problem with his back in June and have sent him an email. Any suggestions are appreciated. 72, Bob WA4MQW "Bob C." <[EMAIL PROTECTED]> wrote: Has worked fine since building earlier this year but after returning from a trip via airline it starts transmitting as soon as I turn it on. Sending 'dahs" with a key plugged in. When I plug in a key I hear its side tone as I normally would under the continuous series of "dahs" being transmitted. When first turned on I see the band is 14mhz then the display only shows led bars when it is sending. I will take it out of the case later in the week and see what I can find but wanted to see if anyone else had experienced the same problem and what was the fix? 73, Bob WA4MQW __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
