Wayne,
Thanks for your response to this thread.
73's and Happy Labor Day,
John W.
San Jose, CA
AJ6BC
On Fri, Aug 26, 2011 at 10:15 AM, Wayne Burdick n...@elecraft.com wrote:
The transverter module, if installed, will have its own antenna jack.
It will be an SMA connector due to space
On 08/25/2011 11:03 PM, David Fleming wrote:
--- Wayne wrote:
I'm picturing control via smart phones, netbooks, and
iPads.
I've done some preliminary design work on a K3 remote control app for iOS
(iPhone/iPad). I'm curious if there is much demand for such an app? And if
so, what
: David Fleming df...@yahoo.com
To: elecraft@mailman.qth.net
Sent: Thursday, August 25, 2011 5:03 PM
Subject: Re: [Elecraft] KX3 Approx Cost/User Downloads/Dev
--- Wayne wrote:
I'm picturing control via smart phones, netbooks, and
iPads.
I've done some preliminary design work on a K3 remote
Wayne,
Thanks for the link.
Perusing the details, I note a single antenna connector, which makes
sense with a compact radio. But I do not see evidence of a
transverter interface. I was not sure if that was being included -
appears not. Being QRP, this is not hard to overcome by use of a
The transverter module, if installed, will have its own antenna jack.
It will be an SMA connector due to space constraints on the right side
panel. You'll be able to have both the HF and transverter antennas
connected at the same time.
Wayne
N6KR
On Aug 26, 2011, at 10:05 AM, Edward R.
Hello Elecrafters,
What is the ballpark cost for the KX3?
Will users be able to download their own code to the KX3?
73's,
John W.
KJ6HCV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I don't think anybody knows what the cost of the KX3 will be.
AFAIK there are maybe two prototypes and production won't begin till the
end of the year.
As for loading you're home brew firmware on the KX3 why would Elecraft
want to open that particular can of worms? It's a support nightmare.
They
H...I think the archives might show a price point of around $800.00 as
the target range.
Perhaps like the K3 there will be some release of code?
Gary
On 25 August 2011 20:26, R. Kevin Stover rksto...@mchsi.com wrote:
I don't think anybody knows what the cost of the KX3 will be.
AFAIK
John Westmoreland wrote:
What is the ballpark cost for the KX3?
Our target is still $799 for the basic 160-6 meter/10 watt/all-mode
KX3 kit, less options. Slightly higher when factory assembled. Prices
were based on cost of parts in May, and everything is going up
industry-wide, so it's
what options will be offered
k3djc
On Thu, 25 Aug 2011 07:36:04 -0700 Wayne Burdick n...@elecraft.com
writes:
John Westmoreland wrote:
What is the ballpark cost for the KX3?
Our target is still $799 for the basic 160-6 meter/10 watt/all-mode
KX3 kit, less options. Slightly higher
Please see the KX3 page on our web site. It's at:
http://www.elecraft.com/KX3/kx3.htm
73,
Wayne
N6KR
On Aug 25, 2011, at 7:47 AM, riese-k3...@juno.com wrote:
what options will be offered
k3djc
On Thu, 25 Aug 2011 07:36:04 -0700 Wayne Burdick n...@elecraft.com
writes:
John
thanks Wayne
the usual suspects
didnt realize it was already posted tot he web site
I WANT ONE TOO
Bob K3DJC
On Thu, 25 Aug 2011 09:22:10 -0700 Wayne Burdick n...@elecraft.com
writes:
Please see the KX3 page on our web site. It's at:
http://www.elecraft.com/KX3/kx3.htm
73,
Wayne
--- Wayne wrote:
I'm picturing control via smart phones, netbooks, and
iPads.
I've done some preliminary design work on a K3 remote control app for iOS
(iPhone/iPad). I'm curious if there is much demand for such an app? And if so,
what features/functionality would be most desirable?
David,
Android!
...bill nr4c
-Original Message-
From: David Fleming [mailto:df...@yahoo.com]
Sent: Thursday, August 25, 2011 5:04 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 Approx Cost/User Downloads/Dev
--- Wayne wrote:
I'm picturing control via smart phones, netbooks
Hello Wayne,
On Thu, Aug 25, 2011 at 7:36 AM, Wayne Burdick n...@elecraft.com wrote:
John Westmoreland wrote:
What is the ballpark cost for the KX3?
Our target is still $799 for the basic 160-6 meter/10 watt/all-mode KX3
kit, less options. Slightly higher when factory assembled. Prices
John,
I am not Wayne, but I would like to inject a few thoughts.
First, the KX3 is an SDR radio - yes, it is direct conversion, unlike
the K3 which first mixes to an 8 MHz IF and then processes the DSP at 15
kHz before going to baseband. Otherwise, most of the functionality of
the K3 will be
I can see using such an app.
The things that I would want to see initially in such a program would be:
Tuning, both by some equivalent of knob turning and by direct entry
AF RF gain adjustments
shift width adjustments
mode switching
antenna switching ATU control
Memory access and maybe even
Adding on to the discussion...
For an iPad app I hope there are no knobs! iPad is all about touch gestures.
Touch finger sweeps for tuning should work great. I can see one use of a knob
if it has one of those little finger depressions on it and you can then use
touch to spin the knob
18 matches
Mail list logo
