It might be in its aftermarket phase now.
Try:
https://www.summitracing.com/parts/rmi-2573?seid=srese1_mmc=pla-google-_-shopping-_-srese1-_-ram-mounts=Cj0KEQjwgJq-BRCFqcLW8_DU9agBEiQAz8Koh74TNypJwTh1hQlMVRIW0cR1DLZ3haDLuNgqYHO7jV0aAlIr8P8HAQ
It's the same mount featured in the KX3 Mobile
Thanks to John and also Jim Rhodes, George-AI4VZ,
Jeff-K2SDR who all sent the same model number.
I called RAM this morning to check on dimensions
that the mount accepted; max is 3.5 inches by 1.6
inch depth which will accommodate the KX3 if you
do not have an add-on heat sink like I have
Been unsuccessful finding the mobile clamp shown in Fig.1, page 5 of
the "Guide to KX3 Mobile Installation"* found on the Elecraft
website. I've searched all over the RAM website and it is not
found. Could someone provide me the web link to that product? I've
cc Matt, as well.
*Matt Zilmer
Thank you all for your suggestions. Wayne got back to me immediately (even
with a 9 hour time difference) and in two emails
Had the problem diagnosed and I was able to make a repair. Issue was 2M
module I had just installed. I operated with a swiss
army knife and am back in business!
I
Hello Thaire,
Could you share this fix please ?.
73's Peter VK4JD
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Thaire
Bryant
Sent: Sunday, 23 August 2015 8:30 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX3 help
Thank you all for your
If it is in transmit and you are running 12W, back off to 10W or 8W.
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/ (my blog)
On Aug 20, 2015, at 10:49 PM, Wayne Burdick n...@elecraft.com wrote:
Hi Thaire,
Is the message occurring in receive mode?
If so, try plugging in headphones.
Hi Thaire,
Is the message occurring in receive mode?
If so, try plugging in headphones. This disables the speaker amplifier, which
in theory could be a source of high current. Turn on the radio and immediately
set AF GAIN to zero.
If that allows the radio to stay on longer, tap DISP and
I am in the Timor Sea on board National Geographic ship Orion. Using
C6APF/MM on board and VK6/W2APF when on land in Kimberly of Western
Australia.
Yesterday after making two QSO's into Japan on 17M while on land, I got a
HI CUR message on KX3. I thought it might be heat and broke down. Just
8 matches
Mail list logo
