Hi Elecraft folks, As I understand it, to remote-mount a KXPA100, while maintaining the ability for serial port (PC) control, one has to run three longish wires: RF, CAT-5 control, and a shielded audio cable (ab)used to return the serial port to the PC. Is that correct?
If so, would it be possible for a future revision of the KXPA100 to use one of the pairs in the control cable to pass that signal back to the KXPACBL adapter, have an additional port there to plug the KXUSB into? At least one pair on the cable, analog ALC, looks to be unused when using a KXPACBL. This would reduce the number of long table runs from three to two, which I'd appreciate. Thanks! Bruce ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com