I just returned from running my KX3, PX3, and KXPA100 portable. I setup the three units at my home QTH anticipating a sked to Rarotonga, at 02Z and find that my KPXA has the swr indictor blinking, and when I try to tune, it stays at 1.6-1 and does not release the transmit, the red led remains on. I am not sure it is tuning at all. I made the mistake of trying to tune with the antenna connection not connected to my KX3. It gave an SWR of 24-1 and tried to tune, then I discovered my problem and turned things off. I have mistakenly tried to tune with an antenna unplugged with no problems. Both antennas were attached to the KXPA when I tried the initial tune. When I connected the RF IN to my KX3, then I had this problem.
Any clues to what is going on? The SWR indicator continues to flash with no RF to the AMP. Thanks, Terry ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com