Richard,
as you're in UK, you may also try to contact QRP Project in Berlin,
Germany. They're doing the official Elecraft support for Europe and it
might be quicker than sending the TRX to US
Hope this helps
73 Thorsten, DH4FT
Am 13.06.19 um 14:45 schrieb Don Wilhelm:
Richard,
I suggest you
Richard,
I suggest you contact supp...@elecraft.com for that information and
possible resolution.
73,
Don W3FPR
On 6/13/2019 3:07 AM, Richard Corfield wrote:
Serial number is 8383, if that helps place the manufacturing date and
therefore whether it's part of a batch with a known issue?
-
Serial number is 8383, if that helps place the manufacturing date and
therefore whether it's part of a batch with a known issue?
- Richard
On Thu, 13 Jun 2019 at 08:03, Richard Corfield
wrote:
> I've tried that with no success. Though I'd have been surprised as the
> trace labelling on the
I've tried that with no success. Though I'd have been surprised as the
trace labelling on the connector indicate microcontroller serial data
rather than individual switches. I'd expect the switch handling to be done
on the switch board.
I have SotaBeam's powerpole adapter fitted to the power
On 6/12/19 at 2:52 PM, richard.corfi...@gmail.com (Richard
Corfield) wrote:
I've tried my KX3 today and noticed that the left hand volume rotary
encoder is not working. Is this a common problem? Is there anything I can
do to try to get it working again?
I'm in the UK and this is a second hand
I've tried my KX3 today and noticed that the left hand volume rotary
encoder is not working. Is this a common problem? Is there anything I can
do to try to get it working again?
I'm in the UK and this is a second hand radio, so I can't so easily just
sent it back to Elecraft I don't think.
A
6 matches
Mail list logo
