/divdivSubject: Re: [Elecraft]
Looking for a KPA500 Schematic /divdiv
/divHas anybody asked Elecraft support for a schematic?
Cannot imagine they would say no.
Just sayin...
73
Gary
Vk1ZZ
K3, KPA500-FT, KAT500-FT
On 29/03/2015 11:03 AM, Johnny Siu vr2...@yahoo.com.hk wrote:
Hello Scott
I have the schematic, Thank you to all who responded to me.I wanted to do some
troubleshooting before calling Elecraft.
Elecraft is taking care of the issue and I'm all set.
__
Elecraft mailing list
Home:
I think the answer as to why an owner would want a schematic is given to us by
the slogan, Elecraft - Hands on Ham RadioSimple as that.
Rick K2XT
__
Elecraft mailing list
Home:
of the whole machine.
Perhaps, elecraft support could give a schematic to the interested kpa500
owners.
73
Johnny VR2XMC 寄件人︰ Scott Manthe scott.man...@gmail.com
收件人︰ elecraft@mailman.qth.net
傳送日期︰ 2015年03月29日 (週日) 8:37 AM
主題︰ Re: [Elecraft] Looking for a KPA500 Schematic
Apparently
kpa500
owners.
73
Johnny VR2XMC 寄件人︰ Scott Manthe scott.man...@gmail.com
收件人︰ elecraft@mailman.qth.net
傳送日期︰ 2015年03月29日 (週日) 8:37 AM
主題︰ Re: [Elecraft] Looking for a KPA500 Schematic
Apparently there is some misunderstanding regarding my comment (Or
people are responding without
A simple enough request - yet such nasty and unhelpful responses. Are
they really necessary?
And, yes.. schematics should be available for ALL ham equipment. In
fact, they should accompany all ham equipment when purchased.
Bill W2BLC K-Line
Good advice, Phil
73, Phil W7OX
On 3/27/15 9:07 AM, Phil Hystad wrote:
Jerry,
You might try my tested and very successful method of working on Elecraft gear.
1. Open up the cabinet (top and bottom).
2. Observe the components inside, looking at each one, contemplating issues,
and
Bill,
You are correct. The schematics should simply be available for download in the
elecraft official website.
73
Johnny VR2XMC
寄件人︰ Bill w2...@nycap.rr.com
收件人︰ elecraft@mailman.qth.net
傳送日期︰ 2015年03月28日 (週六) 3:45 AM
主題︰ Re: [Elecraft] Looking for a KPA500 Schematic
A simple
On Fri, 27 Mar 2015 12:53:33 -0500
Grant Youngman n...@tx.rr.com wrote:
This is very similar to the car quits on the road diagnostic technique. The
first step is to pull off the road. Step 2 is to open the hood and stare at
the engine. Look everywhere. Look at it very carefully. Is it still
I don't believe that there is a misunderstanding at all. The FCC rules state,
among other things:
§ 97.1 Basis and purpose.
The rules and regulations in this part are designed to provide an amateur radio
service having a fundamental purpose as expressed in
the following principles:
(a)
Has anybody asked Elecraft support for a schematic?
I was about to ask the same thing. This thread is just plain silly. When I got
my KPA, I simply called them up and asked for one. They obliged. So simple. I
do happen to agree that it should have been provided in the package though.
Gary
Unbelievable.
On 3/27/2015 10:40 AM, Scott Manthe wrote:
Why would you want a schematic? If it's new, Elecraft will fix it free. I'm
all for being able to troubleshoot my gear, but if I buy something new and it
fails within the warranty period, I'm not going to waste my time trying to fix
it,
Apparently there is some misunderstanding regarding my comment (Or
people are responding without reading the entire message closely...). I
was NOT responding to the original poster. I was responding to the
second commenter, who said that he needed a schematic because his NEW
KPA500 had failed.
)
/divdivTo: Johnny Siu vr2...@yahoo.com.hk /divdivCc: Elecraft List
elecraft@mailman.qth.net /divdivSubject: Re: [Elecraft] Looking for a
KPA500 Schematic /divdiv
/divHas anybody asked Elecraft support for a schematic?
Cannot imagine they would say no.
Just sayin...
73
Gary
Vk1ZZ
K3
Cc: elecraft@mailman.qth.net
Sent: Friday, March 27, 2015 12:07 PM
Subject: Re: [Elecraft] Looking for a KPA500 Schematic
Jerry,
You might try my tested and very successful method of working on Elecraft
gear.
1. Open up the cabinet (top and bottom).
2. Observe the components inside
] Looking for a KPA500 Schematic
Jerry,
You might try my tested and very successful method of working on Elecraft gear.
1. Open up the cabinet (top and bottom).
2. Observe the components inside, looking at each one, contemplating issues,
and possible problems.
3. Place the cabinet back
This is very similar to the car quits on the road diagnostic technique. The
first step is to pull off the road. Step 2 is to open the hood and stare at the
engine. Look everywhere. Look at it very carefully. Is it still there? If the
answer is yes, step 3 is to call AAA.
:)
You might try
I also would like the schematic
My NEW KPA500 also just failed today
From: Phil Hystad phys...@mac.com
To: Jerry Knowlton w...@jetbroadband.com
Cc: elecraft@mailman.qth.net
Sent: Friday, March 27, 2015 12:07 PM
Subject: Re: [Elecraft] Looking for a KPA500 Schematic
Jerry
Good morning,
It looks like my KPA500 has gone down for the count. Is there a schematic
available for this amplifier/
Best regards,
Jerry, W1IE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Jerry,
You might try my tested and very successful method of working on Elecraft gear.
1. Open up the cabinet (top and bottom).
2. Observe the components inside, looking at each one, contemplating issues,
and possible problems.
3. Place the cabinet back together.
4. Ship off to
20 matches
Mail list logo
