Hey folks, This is a technical one where I'm not sure of the correct macro.
Situation: K3s, Remote via RRC 1258, using the serial connection. However, we want an alternate remote that is supported by N1MM on the desktop. Therefore, I want to be able to switch between USB and RS-232 ports for rig control. When on the Remote, I can just use the K3/0 menu to switch to USB, at which time I'll lose rig control. Then, using Anydesk/Teamviewer/etc ... I can connect N1MM on the remote PC and play radio over the USB port. However, I won't have a way to set the rig back to RS-232 38400 to use RemoteRig again... Solution? However, there seems to be the RS232 MN057; macro, which gets you to the RS232 menu setting. I'm just looking for the right sequence to go either direction; obviously, I'll need to be connected on the right port to move control back And... I'll only test this when I'm local in the station! :-) Any help appreciated. 73, Gerry W1VE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
