I wonder if you could just use diodes
From: Richard Lawn <rjl...@gmail.com>
To: elecraft@mailman.qth.net
Sent: Friday, February 10, 2017 10:00 PM
Subject: [Elecraft] Multiple radios with KAT500/KPA combo
I have a setup with 4 different radios on the bench and I'd like
I would run the single PTT to the ATU rather than the amp, and a single PTT
line to the amp from the ATU. The KAT500 needs to be able to break the PA key
line to tune (switch small relays) at less than the full output of the PA.
73 de Dick, K6KR
> On Feb 10, 2017, at 21:00, Richard Lawn
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
I have a setup with 4 different radios on the bench and I'd like to use
them all with my KAT500 and KPA500. One of the radios is a K3. The others
of course all have PTT outputs. I suppose there is no way to do this short
of making a switch box with all PTT lines from the 4 radios and a single
4 matches
Mail list logo