I'm trying to setup my K3 SSB with my Heil Proset 4 (rear panel connector
selected).
I can set the monitor level and the VOX works fine. However, I can't seem to
get any ALC indication on the display no matter how high I set the mic gain.
I'm sure I'm missing something, but I can't figure out
Thinking that the reason was perhaps not being in real transmit mode (despite
what the manual says), I gave it a go, but I don't see any power output in
LSB mode. TUNE gives me the expected output.
-
73, Stan - KR7C
--
View this message in context:
Stan,
Did you set the bias?
73, Mike NF4L
Stan Gibbs wrote:
Thinking that the reason was perhaps not being in real transmit mode (despite
what the manual says), I gave it a go, but I don't see any power output in
LSB mode. TUNE gives me the expected output.
-
73, Stan - KR7C
After getting pointed to the MIC-SEL menu item (for more than fpl/bpl), I
did change the gain to H, and that gives me some ALC. I also tried the
bias setting, but that didn't seem to make much difference.
I see some RF output when I talk, but not much. This SSB stuff is
complicated compared to
- Original Message -
From: Stan Gibbs s...@ajaxsoftware.com
To: elecraft@mailman.qth.net
Sent: Tuesday, June 15, 2010 4:00 PM
Subject: Re: [Elecraft] No K3 ALC indication
After getting pointed to the MIC-SEL menu item (for more than fpl/bpl),
I
did change the gain to H, and that gives me some
Bias should be OFF.
After getting pointed to the MIC-SEL menu item (for more than fpl/bpl),
I
did change the gain to H, and that gives me some ALC. I also tried the
bias setting, but that didn't seem to make much difference.
I see some RF output when I talk, but not much. This SSB stuff
Thanks!
Stan
On Jun 15, 2010, at 2:25 PM, Bob Naumann [via Elecraft]
ml-node+5183588-1192251113-537...@n2.nabble.com
wrote:
Bias should be OFF.
After getting pointed to the MIC-SEL menu item (for more than
fpl/bpl),
I
did change the gain to H, and that gives me some ALC. I
7 matches
Mail list logo