All of this makes sense, but the modem may also contributing through
poor circuit board layout. That's an important part of the difference
between models of modems. And, of course, shielding.
In the olden days, all telco wiring WAS twisted pair, but far too much
parallel conductor cable has
Begin a notebook today! Keep track of everything you do and say, be
kind, and always get the name of people you talk to. Keep track of the
bands frequencies, times, signal levels etc in that notebook. You may
need the information later in the event you contact the ARRL/FCC for
further
From: Guy Olinger K2AV <k2av@gmail.com>
To: John Saxon <johnbsa...@yahoo.com>
Cc: Elecraft Reflector <elecraft@mailman.qth.net>
Sent: Friday, March 17, 2017 4:19 PM
Subject: Re: [Elecraft] OT: RFI problem on 80,40 with AT Uverse
I had this problem in spades especially
rch 17, 2017 3:38 PM
Subject: Re: [Elecraft] OT: RFI problem on 80,40 with AT Uverse
I had similar RFI issues with AT Uverse equipment, both on RX and TX.
I went with Comcast and have no RFI issues with them. Nearly our entire
neighborhood is Comcast. AT tried to deliver Uverse here via
Thanks, Brian. We do have COMCAST in our area, but we had bad luck with them
before. May have to switch back.
--JohnK5ENQ
From: brian <als...@comcast.net>
To: elecraft@mailman.qth.net
Sent: Friday, March 17, 2017 3:11 PM
Subject: Re: [Elecraft] OT: RFI problem on 80,40 with AT
I had this problem in spades especially 160. In the end, after some number
of repairs to AT cabling, etc, the replacement of a 2Wire 3800 gateway
box with a 3801 killed it dead.
IF you have a 3800, it will need to be replaced, although the sudden
appearance seems to sound like something suddenly
2017 Committee
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
brian
> Sent: Friday, March 17, 2017 1:11 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] OT: RFI problem on 80,40 with AT Uverse
>
> These Uverse RFI
These Uverse RFI problems that others reported made me choose COMCAST
when I moved. I guess you are pretty much locked in.
I hate COMCAST but trying to solve these problems was considered more of
a hassle with the possibility of no solution.
The other issue is some reported that the Uverse
keep everyone filled in on the progress.. Fred
Fred Moore
email: f...@fmeco.com
wd8...@gmail.com
Phone: (321) 217-8699
On 3/17/17 3:37 PM, John Saxon via Elecraft wrote:
> Off topic, but perhaps others have had the same problem.
> I have a K3/100 + ATU (ser#3542), purchased as a kit in
Off topic, but perhaps others have had the same problem.
I have a K3/100 + ATU (ser#3542), purchased as a kit in 2009. No problems with
RFI until April of 2016. All of a sudden RFI on 80,40(didn't try 160). Been
off these bands ever since, although all my buddies hang out on 40. Have had
AT
10 matches
Mail list logo
