Doug,
As Mel has suggested a laptop supply is an option, I used one to power my K2
in RX mode 24/7 over a period of almost 3 years during a propagation study.
The supply I used outputs 15V @ 500mA, so I used a LM317 regulator after the
supply to obtain the required output voltage for the K2
Hum?
--- On Sun, 12/6/09, DOUGLAS ZWIEBEL doug...@gmail.com wrote:
From: DOUGLAS ZWIEBEL doug...@gmail.com
Subject: [Elecraft] OT: wall wart for RX-only PS?
To: Elecraft Reflector elecraft@mailman.qth.net
Date: Sunday, December 6, 2009, 2:30 PM
OK folks, I do own a pair of K3 and a K2...but I
Doug, KR2Q wrote:
I have a RS wall wart rated at 14 watts (12v, 500ma).
Is there any reason why I should NOT use this as the PS?
Hmm... 12V at 500 mA is only 6 watts-- perhaps the 14 watts
refers to the power drawn by the wall wart while supplying rated current.
If that's the case, then I
...@yahoo.com wrote:
From: Wes Stewart n...@yahoo.com
Subject: Re: [Elecraft] OT: wall wart for RX-only PS?
To: Elecraft Reflector elecraft@mailman.qth.net, DOUGLAS ZWIEBEL
doug...@gmail.com
Date: Sunday, December 6, 2009, 2:01 PM
Hum?
--- On Sun, 12/6/09, DOUGLAS ZWIEBEL doug...@gmail.com wrote:
From
On Sun, 6 Dec 2009 14:21:47 -0800 (PST), Mel Farrer wrote:
Most of the wall warts are just rectified AC. Very little if any
filtering.
We have a lot of power interruptions up here in the Santa Cruz
mountains, thanks to storms, falling trees, and wild fires. Rather
than buy a lot of
5 matches
Mail list logo