New BETA firmware for the P3/SVGA is available for download from HERE <ftp://ftp.elecraft.com/P3/firmware/beta/P3-0150_SVGA-0124BETA.zip>
This release includes support for the new Elecraft P3TXMON accessory board. Please refer to the P3/SVGA Manual Rev E <http://www.elecraft.com/manual/E740152%20P3%20Owner's%20man%20Rev%20E.pdf> and the P3TXmon Installation Guide <http://www.elecraft.com/manual/E740271%20TX%20Mon%20Option%20Installation%20Rev%20A.pdf> for more information. Note: if you are upgrading your SVGA to the new 1.24 beta, you do not have to download the fpga files as they have not changed. The release notes for these revisions: MCU 01.50 / 7-27-2015 * Added support for the transmitter monitor module. Added a new "TXMonMenu" sub-menu with entries: "CW Split" (enable split screen for CW mode), "Mtr En" (turn on the "analog" meter display), "MtrScale" (set power meter full scale), "Mod En" (turn on the modulation envelope display), "ModScale" (set time/div of modulation display), "SensorCal" (RF power calibration, separate for each sensor type) and "TX hang" (delay time when the transceiver goes from transmit to receive). * Added an additional middle-sized font selection of 7 x 11 pixels. * The waterfall parameters for the external display are now different from the main display. The following new entries have been added to the "SVGA menu" sub-menu: "SVGA WfEn" (turns the waterfall on/off or sets it to track the main display), "SVGA WfAv" (waterfall averaging on/off), "SVGA WfCo" (waterfall color map), "SVGA WfHt" (waterfall height), and "SVGA WfMk" (waterfall markers on/off). * Supports preamplifier number 2 of the KXV3B (which is standard in the K3S). P3SVGA 01.24 / 7-27-2015 * Added Noise Blanker. * Developed a faster method of detecting K3 transmit/receive state changes. * Added data terminal ‘send on space’ to the available data TX modes. * Added replay of keyboard input using Ctrl-Alt-R. Ctrl-C will clear replay buffer. * Added ‘\r’ to embed a CR in text message. Use ‘\\’ to send a single ‘\’. * Added ‘\c’ to embed an incrementing serial counter in a text message. Clearing/presetting counter may be done in the setup screen (Ctrl-Alt-S). * Text messages sent in data terminal mode now respect the mode setting (VOX, CR, ^T). * Fixed a bug in data terminal mode that was causing the time-out to not reset correctly. * Fixed a bug in data terminal mode that was causing non-existent characters to be retrieved and sent. Also fixes a bug of missing characters. * Fixed a problem that caused some SVGA boards to not initialize correctly from P3 commands at boot. * Added waterfall cursors, these display exactly as they do on the P3 screen. 73, Paul N6HZ -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-Beta-1-50-1-24-now-available-P3TXMON-tp7605498.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com