> I use a Y connector on the RS232 out from K-3. One side goes to
> the switch box, the other goes to computer for N1MM control.
I'm amazed that works at all, for two reasons. One is, what do you do
with the RX line to the K3? It can't just connect in parallel to the TX
lines from both the P3
Hi all,
Trying to maximize the use of my one P3 by switching between 2 K-3s. I use 2
separate switch boxes-one for the RS232 serial cable and one for the if cable.
I use a Y connector onthe RS232 out from K-3. One side goes to the switch box,
the other goes to computer for N1MM control.
All
Hi,
Has anyone tried to use a single P-3 with a BNC switch box to feed either K-3
in an SO2R setup? In the SS this past weekend there were times when I would
have preferred using the P3 on the S & P radio instead of having it on the Run
radio where it is permanently connected.
See plenty of
3 matches
Mail list logo
