[Elecraft] P3 / K3 / SteppIR / DXLabs

I have just added a P3 panadapter to my station and need to work out the communication with this new device and the existing ones. My setup currently works fine with the SteppIR controller tagged into a Y-cable from SteppIR (RS232/DE-9). The anchor back to the USB hub is the ElecraftUSB cable

Re: [Elecraft] P3 / K3 / SteppIR / DXLabs

Jack, Make sure you set everything to 38.400 bps - SteppIR, K3, P3 and Commander's Primary CAT Serial Port. Connect the SteppIR Y cable between the K3 and P3 (computer connection to the P3) and the Elecraft USB adapter to the P3 RS-232 input. Essentially the system is linear: Computer - P3 -

Re: [Elecraft] P3 / K3 / SteppIR / DXLabs

21, 2012 12:54:18 PM Subject: Re: [Elecraft] P3 / K3 / SteppIR / DXLabs just a reminder... The computer should be connected directly to the P3. The P3 connects to the Radio(K3). Amd most importantly, the P3 talks to the radio at 38,400 BAUD.However you had it working before the P3 was added