[Elecraft] P3 Freeze

2015-03-02 Thread Bud Governale
Has a non Beta firmware update been released which minimizes the time for the SVGA display to unfreeze between CQ’s during a contest? This made it difficult to find/observe a clear channel in the waterfall between CQ’s or contacts. 73, Bud W3LL w...@arrl.net

Re: [Elecraft] P3 Freeze

2015-03-02 Thread Amateur Radio Operator N5GE
Don't see that here at 100 WPM, with or without QSK. Here are the settings I have on my P3: AVERAGE = 5 Waterfall Averaging = OFF Peak = OFF Using a 15 yr old VGA Amateur Radio Operator N5GE On Mon, 02 Mar 2015 10:57:05 -0500, you wrote: Has a non Beta firmware update been released which

Re: [Elecraft] P3 Freeze

2015-03-02 Thread Mike K2MK
Hi Bud, I believe it's still beta. I'm running 1.35 on my P3 and 1.22 on my SVGA. The freezes have been far fewer but it's still not 100%. However, the fact that it is beta should not prevent you from using it. Beyond the occasional freezes I have not seen any other problems with the firmware.

[Elecraft] P3 Freeze.

2013-01-11 Thread Tom Fitzpatrick
    My P3 display periodically freezes.  I've run a couple of contests with it going and it seems fine, but every once in awhile, it will just lock up.  I turn it off and back on and it's ok.  Any ideas??   Tom, K4IE __ Elecraft

Re: [Elecraft] P3 Freeze.

2013-01-11 Thread Eduardo González
You must check serial cable. Edu YY4GMJ On Fri, Jan 11, 2013 at 1:14 PM, Tom Fitzpatrick k4ie_...@yahoo.com wrote: My P3 display periodically freezes. I've run a couple of contests with it going and it seems fine, but every once in awhile, it will just lock up. I turn it off and back

Re: [Elecraft] P3 Freeze.

2013-01-11 Thread Mike K2MK
Hi Tom, This has happened to me on two or three occasions. It never happened before I installed the SVGA board. But of course after the SVGA installation the firmware has gone through one or two revisions. I think it happened going from transmit to receive. Mine also cleared up with a quick

Re: [Elecraft] P3 Freeze.

2013-01-11 Thread Tom H Childers
I have experienced this, but my lock-ups occur when tapping the SELECT button and using the knob on the P3 to QSY to a frequency on the SVGA display. It's never stopped doing that, so now as a work-around, I tap the FINE button on the right of the main VFO knob with my social finger and use the

Re: [Elecraft] P3 Freeze.

2013-01-11 Thread Paul Saffren N6HZ
We've identified an issue that can sometimes cause the SVGA to freeze when the encoder on the P3 is moved very rapidly. We are working on a solution. 73, Paul -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-Freeze-tp7568550p7568565.html Sent from the Elecraft