I have noticed that my carefully setup span to cover the entire
60M band wasn't quite right when I went back to that band. I
always run in fixed-tune mode as I mostly use the waterfall for
locating signals.
I change modes quite a bit as I am scanning the airwaves. I have
noticed that the VFO
Bill,
I’ve had the same problem with my P3. I keep the spans on 50kHz on all bands
and the problem seems to occur on the WARC bands with the odd limits (17m and
12m). It may have something to do with odd splits, i.e. 17 meters, 18.068 -
18.118 is 50kHz. In the last several weeks I have been cha
Mine sort of, kind of, does the same or similar thing although I've
never noticed a correlation with operation on 10. I normally run
fixed-track with a 20 KHz span starting at the bottom of each band
[don't operate 17 or 24 much]. Sometimes, it seems more frequent if
I've been jumping around
My P3 routinely forgets the per-band SPAN when I set it using software commands
instead of P3 buttons. Doesn’t matter which band, and the SPAN is remembered
properly if I press the corresponding FN button for the computer-set SPAN
before I change bands.
My P3 also forgets the per-band REF LVL s
As a CW operator, I keep the P3 in fixed track mode covering the lower 50 Khz
of each band. From time to time the P3 forgets the setting on the 17 and 12
meter bands only. I'm wondering if i am the only person that has experienced
this issue. I can't pinpoint exactly how this happens but I am
5 matches
Mail list logo