Oops. Mine is a K780.
Note that a keyboard using BLE/Bluetooth won’t work with the P3SVGA, even with
a BLE dongle due to the lack of the Bluetooth stack on the P3SVGA card.
Thus you must use a keyboard with a Unifying or similar dongle to communicate
with the keyboard.
73!
Jack, W6FB
> On Jun
On the rare occasions that I program more macros, I use an old wired
keyboard and a 10" external monitor.
Dave, did you say they have a 64 key version out now?
I also have a Pigknob I am thinking of attaching to the side of the
keypad. That would accommodate all my tuning and VFO needs without
Logitech keyboards work very well with the P3SVGA. The Logitech Unifying
receiver plugs into the P3SVGA’s USB port
and just work.
Recent keyboards such as the K380 give you additional features - you can also
use the keyboard with up to two additional devices.
This can be used to control both the
See the link in my original post... There are 20 or so macros I use
every day on the K3/P3.
73s and thanks,
Dave
NK7Z
https://www.nk7z.net
On 06/25/2018 07:59 AM, Buck wrote:
What Macros are people putting in the P3? I only thought they were
helpful if you were operating remotely.
Buck, k4
What Macros are people putting in the P3? I only thought they were
helpful if you were operating remotely.
Buck, k4ia
Honor Roll
8BDXCC
EasyWayHamBooks.com
On 6/25/2018 10:52 AM, Dave Cole (NK7Z) wrote:
I have not found a way to pre-load macros either, but alas, it is the
same, with or withou
I have not found a way to pre-load macros either, but alas, it is the
same, with or without the Genovation. The Genovation just forces you to
load a lot of macros at once, so it feels like it is related. I think,
no matter how you use the P3, with or without the Genovation, you always
need to
Still the biggest problem in using the Genovation or P3 macros in
general is the clunky keyboard interface that requires hand typing in
all the macros directly into the P3. I may have missed something but
have not seen any method where you can create macros, test them, then
transfer to the P3.
raft-boun...@mailman.qth.net
> On
> > Behalf Of N4OI - Ken
> > Sent: Monday, June 25, 2018 12:29 PM
> > To: elecraft@mailman.qth.net
> > Subject: [Elecraft] P3_SVGA Wireless KB Support?
> >
> >
> > I have a P3 and will be ordering the P3_SVGA. I assume this will
t-boun...@mailman.qth.net On
> Behalf Of N4OI - Ken
> Sent: Monday, June 25, 2018 12:29 PM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] P3_SVGA Wireless KB Support?
>
>
> I have a P3 and will be ordering the P3_SVGA. I assume this will NOT
> support a wireless USB
As long as the keyboard appears to be a dumb keyboard it should work...
I have a Genovation 64 Key programmable keypad working that fires macros
into the SVGA, at the push of a single button. See:
https://www.nk7z.net/adding-external-keypad-k3/
I fire all sorts of prebuilt macros into the P3,
bject: [Elecraft] P3_SVGA Wireless KB Support?
I have a P3 and will be ordering the P3_SVGA. I assume this will NOT
support a wireless USB keyboard, but just thought I would confirm before
buying one... On the topic, any favorite keyboards I should consider - or
avoid? Thanks for your input
Ken,
It will work with SOME wireless keyboards. Best if you can try them
before buying. It must be a PC keyboard, those for the Mac will not work.
73,
Don W3FPR
On 6/25/2018 8:29 AM, N4OI - Ken wrote:
I have a P3 and will be ordering the P3_SVGA. I assume this will NOT
support a wireless
I have a P3 and will be ordering the P3_SVGA. I assume this will NOT
support a wireless USB keyboard, but just thought I would confirm before
buying one... On the topic, any favorite keyboards I should consider - or
avoid? Thanks for your input!
73
--
Sent from: http://elecraft.365791.n
13 matches
Mail list logo