I have a foot peddle that I would like to use with the KX3. So does anyone know
a good source that can take the paddle and mic input to connect with the unit
73
Robert
a 'kosher' ham
Sent from my BlackBerry device
__
Elecraft mailing
Robert,
You can set up the ACC2 jack for use with a foot switch. Set MENU:ACC2
IO to LO=PTT, and connect your footswitch between ACC2 tip contact and
ground.
73,
Wayne
N6KR
On May 13, 2012, at 8:39 AM, va3...@gmail.com wrote:
I have a foot peddle that I would like to use with the KX3. So
Does anyone know of a 'pigtail' to allow a foot pedal with a microphone
attached to a KX3.
Now I have a K3 pigtail but they are not the same connection obviously
Just throwing this out
Robert
a 'kosher' ham
Sent from my BlackBerry device
I made my own Robert...simple to do. But I suspect a simple stereo
Y-adapter will do with one male stereo and two female stereo (like a
headphones splitter) will work too. Just wire the mic as mic+ to tip
and mic- to sleeve. For the PTT use the PTT signal on the ring and
PTT gnd on the sleeve
You could adapt the Heil foot switch to the KX3's Mic jack.
matt W6NIA
On Wed, 18 Apr 2012 11:33:01 +, you wrote:
Does anyone know of a 'pigtail' to allow a foot pedal with a microphone
attached to a KX3.
Now I have a K3 pigtail but they are not the same connection obviously
Just
5 matches
Mail list logo