Push on each one of the plugs in both the PX3 and the radio. This can be
caused by a poor connection.
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
What is your CW offset set to? Perhaps that is a cursor showing the CW
offset?
73,
Scott N9AA
On 6/27/19 2:45 PM, Ian Kirkpatrick via Elecraft wrote:
Hi,
I have recently purchased a new PX3 for use with my KX3.In CW mode in the
waterfall display there appears a distinct black line 600hz to
Hi,
I have recently purchased a new PX3 for use with my KX3.In CW mode in the
waterfall display there appears a distinct black line 600hz to the right of the
carrier, the black line is 50hz wide.Is this normal or is there a fault with
the PX3 or is there something I have not done in setting
Both of these problems have been reported here. The second problem is better
but still exists. On the first with the blip that is offset I use the
workaround of operating CW with a reverse offset until they get it fixed. At
least there isn't any off set used on field day.
John K7JLT
Phil
For the KXPA100 issue (PA MODE ON to OFF), just leave the KXPA100
powered on full-time. This works in my mobile installation, meaning
the KXPA100 is always available. This is not true if the KX3 is
removed, when PA MODE will default OFF because of the missing KXPA100.
My mobile installation has
Finally got the KX3 – PX3 – KXPA100 system cabled together and on the air
today, all of the F/W updated. All OK but for two anomalies, one of them
a bit of a nuisance.
The PX3 shows a double sharp spike offset from the tuned frequency about
600 and 700 Hz (an eyeball estimate), at about S2.
Make sure those (all!) cables are fully inserted,
Ted. I've found that to take more push in the
case of the KX3 and PX3 than some of my other devices.
Phil W7OX
On 6/13/15 4:39 PM, Dauer, Edward wrote:
Finally got the KX3 – PX3 – KXPA100 system cabled together and on the air
today, all of
7 matches
Mail list logo