I've always soldered pins to the wire and used a dab of glue on the plastic
pieces to keep them together..I've never had a failure or wire pull from
the pin.
What I don't get are the hams who rail against the Power Poles but never have
done any power.current testing. I did and they work gre
HRO carries a lot of Powerwerx stuff. I'll try to find some tomorrow at the
Sunnyvale CA store.
/Rick
On Mon, Jun 17, 2013 at 2:33 PM, Phil Kane wrote:
> On 6/17/2013 10:49 AM, Terry Schieler wrote:
>
> > I'd have to need a whopping large quantity of these retainers to
> > justify the shipping
On 6/17/2013 10:49 AM, Terry Schieler wrote:
> I'd have to need a whopping large quantity of these retainers to
> justify the shipping and handling ($6.49) that Powerwerx wants to
> ship 5 of these little $0.49 devils to me here in the Midwest.
> Perhaps someday I'll buy some other stuff from them
e 17, 2013 10:32 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] Power Poles
Like these?
http://www.powerwerx.com/powerpole-accessories/powerpole-retention-clips.html
wunder
K6WRU
__
Elecraft mailing list
Home: http://mailman.qth.n
Reflector
Subject: Re: [Elecraft] Power Poles
Like these?
http://www.powerwerx.com/powerpole-accessories/powerpole-retention-clips.html
wunder
K6WRU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
The other option is a small tie-wrap through the sets of holes. --wunder, K6WRU
On Jun 17, 2013, at 8:43 AM, Rick Bates wrote:
> Yes, but preferably something attached to the connector and not able to
> 'disappear' when you disconnect them. ;-) now where I set that? Oh, my arm
> 'swept' the
Yes, but preferably something attached to the connector and not able to
'disappear' when you disconnect them. ;-) now where I set that? Oh, my arm
'swept' the table, again.
Those will do until something better happens.
Thanks, I'll order a bag or two. I prefer a positive lock on connector
Like these?
http://www.powerwerx.com/powerpole-accessories/powerpole-retention-clips.html
wunder
K6WRU
On Jun 17, 2013, at 8:01 AM, Rick Bates wrote:
> I would still prefer to have a latching hook to keep the finished connectors
> together.
>
> Rick wa6nhc
>
> Tiny iPhone 5 keypad, typos ar
I would still prefer to have a latching hook to keep the finished connectors
together.
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
On Jun 17, 2013, at 4:56 AM, Stephen Roberts wrote:
> The last batch of PP's I purchased were pre welded together, which is very
> convenient. A spot
The last batch of PP's I purchased were pre welded together, which is very
convenient. A spot of super glue also works well.
Steve
W1SFR
Sent from my iPad
On Jun 17, 2013, at 5:35 AM, "Fred Smith" wrote:
> When I first tried my hand at power poles they came apart as soon as I put
> them toget
When I first tried my hand at power poles they came apart as soon as I put
them together. Had issues for some time till I finally showed a friend one
of them and he said no wonder you prepped them great, the problem but all
are installed upside down 8>(
For some time now all of mine are very depen
On 6/28/2010 8:13 AM, Don Wilhelm wrote:
> John,
>
> If one has to tape them together, the most likely problem is that they
> were not assembled correctly. Properly assembled APPs are very good and
> have an adequate amount of pullout resistance. The specification is 25
> lbf - so yes, they will
On Behalf Of Don Wilhelm
Sent: Monday, June 28, 2010 08:13
To: tpcj1...@crocker.com
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Power Poles...
John,
If one has to tape them together, the most likely problem is that they
were not assembled correctly. Properly assembled APPs are very good
On 6/28/2010 8:48 AM, Grant Youngman wrote:
> The other point was -- How hard is it to build a power pole connector,
> put it together properly, and LABEL the darn thing to avoid
> disasters like plugging a 24v supply into a 12v radio? :-)
That's what they make different color shells for, and t
On 6/28/2010 7:29 AM, Grant Youngman wrote:
> But it isn't possible to accidentally put the two connector sets
> together in anything but the correct orientation.
Yes. I have a 3x2 set for the control head in the car, and I found out
the hard way that looking at them the mating ends have to be
8 Jun 2010 10:48:20 -0500
From: Grant Youngman
Subject: Re: [Elecraft] Power Poles...
To: Elecraft Email
Message-ID:
Content-Type: text/plain; charset=us-ascii
That was the point.
The other point was -- How hard is it to build a power pole
connector, put it together properly, and LABEL the darn
"Grant Youngman" ; "Elecraft Email"
Sent: Monday, June 28, 2010 12:25 PM
Subject: Re: [Elecraft] Power Poles...
> One method to avoid confusion is to use different color
> power poles for different supply voltagesred-black for
> 13.5V, green-black for 24V, Whi
raft Email
Subject: Re: [Elecraft] Power Poles...
I'm actually not entirely sure how one reverses polarity with a properly
assembled PP connector. I suppose one could hammer them together in the
wrong orientation? :-)
__
Elecra
Remove the connector and solder the wires directly; this also reduces IR
loss.
David
G3UNA
>
> After watching the PP connectors on my K3 wiggle around at Field Day, I
> have to question again why Elecraft chose these toads-in-a-tuxedo for a
> connector. PP are way over-rated. The only strai
2010, at 10:38 AM, Tom W8JI wrote:
>
> >
> > - Original Message - From: "Grant Youngman"
>
> > To: "Elecraft Email"
> > Sent: Monday, June 28, 2010 10:29 AM
> > Subject: Re: [Elecraft] Power Poles...
> >> It would also be si
iginal Message - From: "Grant Youngman"
> To: "Elecraft Email"
> Sent: Monday, June 28, 2010 10:29 AM
> Subject: Re: [Elecraft] Power Poles...
>> It would also be simple enough for the manufacturers to solve the polarity
>> problem by using a bridge re
- Original Message -
From: "Grant Youngman"
To: "Elecraft Email"
Sent: Monday, June 28, 2010 10:29 AM
Subject: Re: [Elecraft] Power Poles...
> It would also be simple enough for the manufacturers to solve the polarity
> problem by using a bridge rectifier at
I like Paul's idea listed below.
Personally, I like APP. If they are assembled correctly, there is more
than ample "holding" power.
That said, I AM anal and always support ANY connection with strain
relief.
Oh, and how the heck can those roll pins fall out? They're in there so
tight, you nee
I've used these PowerPole connectors for several years, both for mobile and
fixed station use. I've never had a problem with these connectors coming
apart, even in the mobile environment. I crimp the wire to the contacts
using the West Mountain Radio crimper, and all crimps have been perfect.
the wires together and slap some
electrical tape on it. For permanent work, I use solder then tape. No
special tools needed.
Steve
N4LQ
- Original Message -
From: "Grant Youngman"
To: "Elecraft Email"
Sent: Monday, June 28, 2010 10:29 AM
Subject: Re: [Elecraft] Power
I'm actually not entirely sure how one reverses polarity with a properly
assembled PP connector. I suppose one could hammer them together in the wrong
orientation? :-)
It would also be simple enough for the manufacturers to solve the polarity
problem by using a bridge rectifier at the power i
> That way, the connector: (1) becomes square in shape, instead of a thin
> rectangle that's prone to
> accidental lateral pulls; (2) offers higher current-carrying capabilities;
> and (3) has significantly increased pull strength, yet can still break
> away
> for safety concerns.
Just thought o
On Mon, 28 Jun 2010 09:13:21 -0400, Don Wilhelm wrote:
>I have never had any problem with them, and I use them on all my DC
>connections.
Same here. I LOVE the Power Pole connectors, and use them extensively.
I've broken all of my various DC power leads to insert them so that I
can mix and mat
I'm traveling at the moment and can't confirm this, but is may be possible
to use a small retention wire if there's a roll-pin hole on the K3's APP.
The West Mountain RigRunners use these to keep the APPs intact and it works
very well.
I have mixed feelings about the APP. I like it for its ver
John,
If one has to tape them together, the most likely problem is that they
were not assembled correctly. Properly assembled APPs are very good and
have an adequate amount of pullout resistance. The specification is 25
lbf - so yes, they will not withstand a 25 pound pull force, but that is
After watching the PP connectors on my K3 wiggle around at Field Day, I
have to question again why Elecraft chose these toads-in-a-tuxedo for a
connector. PP are way over-rated. The only strain relief they provide is
when
they come apart - which is often. I suppose we could call that de
Aside from "Polish Solidarity" this long string of emails about the
Anderson variety only confirms my experience-based opinion that these
connectors are very poorly designed and should be avoided. People I know
who use them in mobile applications tape them together. My K2 experience
with t
From: David Ferrington <[EMAIL PROTECTED]>
For what its worth, I'm switching EVERY 12v cable/device I have to use APPs,
including completely replacing the molex style connector on my FT-857, which
has proven to be less than reliable after only 3 yrs.
My local club (Minnesota QRP club) has stan
33 matches
Mail list logo