Hi just put together my new KX3 but something seems amiss. I was tuning through
the 40m cw band and I was not hearing any signals.. I then switched to web mode
and there were tons as to be expected. So I put it back in cw mode and heard
nothing tuning up and down the bands. I then adjusted the
Original message
From: Tom tom...@videotron.ca
Date: 01/10/2013 19:56 (GMT-05:00)
To: Elecraft Mailing list Elecraft@mailman.qth.net
Subject: Question about my kx3. Problem?
Hi just put together my new KX3 but something seems amiss. I was tuning through
the 40m cw band
Original message
From: Ray Sills raysil...@verizon.net
Date: 01/10/2013 21:45 (GMT-05:00)
To: Tom tom...@videotron.ca
Subject: Re: [Elecraft] Question about my kx3. Problem?
HI Tom:
It appears that you do not have the roofing filter option. I had the
same situation
)
To: Tom tom...@videotron.ca
Subject: Re: [Elecraft] Question about my kx3. Problem?
HI Tom:
It appears that you do not have the roofing filter option. I had the
same situation here, and was puzzled by it. So, I just leave the
tuning above 2.0 and all is OK.
73 de Ray
K2ULR
In the menus, ensure that RX XFIL is set to Not Inst.
Mark
KE6BB
From: Tom tom...@videotron.ca
Sent: Tue, Oct 1, 2013 at 8:41 PM
To: Ray Sills raysil...@verizon.net
CC: Elecraft Mailing list Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Question about my kx3. Problem
Sills raysil...@verizon.net,Elecraft Mailing list
Elecraft@mailman.qth.net
Subject: Re: [Elecraft] Question about my kx3. Problem?
This sounds that while you do not have the KXFL3 installed, it is still enabled
in the KX3 set up menu. This will cause the KX3 to route signals through the
wrong
6 matches
Mail list logo
