I have been using the Elecraft KRC2 for remote switching for several years.
It drives a MicroHAM 10 port switch. The switch is well made in a heavy
casting and can be used in the shack or on your tower. I have never had the
slightest problem with it.
I built the KRC2 as a kit (easy) and the
Is there any way for KRC2 to switch more than 1 antenna per band?
Ignacy
On Mon, May 21, 2012 at 7:39 AM, Robby.VY2SS [via Elecraft]
ml-node+s365791n7556199...@n2.nabble.com wrote:
I have been using the Elecraft KRC2 for remote switching for several
years.
It drives a MicroHAM 10 port
Yes,
You can use the high side switching for one set of relays and the low
side for another set. That gives you two. If you need more than 2, you
will have to be more creative and add a few components external to the
KRC2 - a little it of logic done with diodes and relay coils.
73,
Don W3FPR
with mine.
Mark n2qt
-Original Message-
From: Robby.VY2SS
Sent: Monday, May 21, 2012 7:39 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] RCS-12 or Station Master for K3?
I have been using the Elecraft KRC2 for remote switching for several years.
It drives a MicroHAM 10 port switch
, 2012 2:54 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] RCS-12 or Station Master for K3?
Is there any way for KRC2 to switch more than 1 antenna per band?
Ignacy
On Mon, May 21, 2012 at 7:39 AM, Robby.VY2SS [via Elecraft]
ml-node+s365791n7556199...@n2.nabble.com wrote:
I have been
Yes! The KRC2 can be configured to enable any output terminal for any
input band. In the severe case, you could turn all of them on for a
band. My own KRC2 is set to drive a single band for 20, 15 and 10
meters to support my tribander, while a second output is enabled for
80 and 40 meters
I have a few switches and would like to automate band changes. There are two
choices:
1. Ameritron RCS-12. About $320 with the relay box. Very simple but one
needs to use tricks to use two relay boxes.
2. Microham Station Master. Much more elaborate but more complicated,
relying on computer, and
: [Elecraft] RCS-12 or Station Master for K3?
I have a few switches and would like to automate band changes. There are
two
choices:
1. Ameritron RCS-12. About $320 with the relay box. Very simple but one
needs to use tricks to use two relay boxes.
2. Microham Station Master. Much more elaborate
: Ignacyn...@arrl.net
To:elecraft@mailman.qth.net
Sent: Sunday, May 20, 2012 3:46 PM
Subject: [Elecraft] RCS-12 or Station Master for K3?
I have a few switches and would like to automate band changes. There are
two
choices:
1. Ameritron RCS-12. About $320 with the relay box. Very simple but one
9 matches
Mail list logo
