Does the K3 recall output levels ONLY when used with the KPA-500 or will
it recall the levels for each band irrespective of the amp used ?
George K4GM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
That's one for the Elecraft developers to answer here on the reflector…!
On Thursday, Mar 1, 2012, at Thursday, 9:36 AM, K4GM-George wrote:
But must the K3 be used with a KPA500 for this to occur or is there a command
in the config somewhere to tell the K3 to recall a power level for each
George,
You can set the menu for per-band power levels - see the K3 manual page 27.
With the KPA500 connected to the K3 with the AUX cable, there will be an
additional per band power setting available. See the KPA500 manual page 9.
73,
Don W3FPR
On 3/1/2012 11:43 AM, K4GM-George wrote:
Does
://www.dh8bqa.de
- Original Message -
From: Jim Bennett w6...@mac.com
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Thursday, March 01, 2012 6:51 PM
Subject: Re: [Elecraft] Recalling power output levels with K3
That's one for the Elecraft developers to answer here on the reflector
4 matches
Mail list logo
