l work with the KPA500 and not just the K3
>>
>> -Original Message-
>> From: "Alan"
>> Sent: Saturday, August 16, 2014 9:08pm
>> To: elecraft@mailman.qth.net
>> Subject: Re: [Elecraft] Rf sensor
>>
>> Right, the sensor is an opti
On Sat,8/16/2014 9:42 PM, Vic, K2VCO wrote:
And if you already have a W2 can you connect the sensor to both or do
you need two sensors? Or could I retire the W2?
What are the specs for the sensor? I have a bunch of high quality
inline sampling couplers.
73, Jim K9YC
___
Don
Prior to the announcement of the svga option, the rf sensor was already
known about.
Then it was noted that the rf sensor was one of two more features to come.
Gary
Vk1ZZ
K3, KX3, KPA500-FT, KAT500-FT,P3.
On 17/08/2014 2:42 PM, "Vic, K2VCO" wrote:
> Interesting. And if you already have a W2
Interesting. And if you already have a W2 can you connect the sensor to
both or do you need two sensors? Or could I retire the W2?
On 8/17/14 5:25 AM, Alan wrote:
It uses the W2 wattmeter sensors. According to the Elecraft order page
there are three flavors of sensor:
DCHF-200 1.8-54 MHz, 0
Thanks for the confirmation, Alan. I would have hated to purchase
the P3SVGA just to make use of the RF sensor/monitor scope feature.
73,
... Joe, W4TV
On 2014-08-16 10:08 PM, Alan wrote:
Right, the sensor is an optional module that plugs into the rear-panel
power supply board and has a
I hope that is not to imply that products and enhancements should be
scheduled in the same order that concepts come up on this email reflector.
i.e - I don't understand what the relevance of "prior to the svga board"
has to do with the order in which products, options and enhancements are
desi
work with the KPA500 and not just the K3
-Original Message-
From: "Alan"
Sent: Saturday, August 16, 2014 9:08pm
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Rf sensor
Right, the sensor is an optional module that plugs into the rear-panel
power supply board and has a
Just hope the sensor will work with the KPA500 and not just the K3
-Original Message-
From: "Alan"
Sent: Saturday, August 16, 2014 9:08pm
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Rf sensor
Right, the sensor is an optional module that plugs into the rear-panel
po
Right, the sensor is an optional module that plugs into the rear-panel
power supply board and has a rear-panel connector that matches a W2
wattmeter sensor. It does not require an SVGA module.
Alan N1AL
On 08/16/2014 05:38 PM, Joe Subich, W4TV wrote:
I hope the sensor is a stand alone opti
I dont think picky is accurate.
The RF sensor was prior to the svga board and as such it is reasonable to
expect that it will be that way.
Not all P3's are sold with the svga and i imagine sales of the rf sensor
could be higher if that option was not required.
The cost of the sensor will be a signi
What a picky bunch! ;-)
Phil W7OX
On 8/16/14, 5:38 PM, Joe Subich, W4TV wrote:
I hope the sensor is a stand alone option and
does not depend on
the P3SVGA as any dependency would make the
sensor a non-starter
in my opinion.
73,
... Joe, W4TV
On 2014-08-16 4:28 PM, Bruce Beford wrote:
I hope the sensor is a stand alone option and does not depend on
the P3SVGA as any dependency would make the sensor a non-starter
in my opinion.
73,
... Joe, W4TV
On 2014-08-16 4:28 PM, Bruce Beford wrote:
I don't believe Wayne meant to imply an RF sensor for the PX3 is under
development.
That's correct (P3, not PX3). Sorry if I implied otherwise.
Wayne
N6KR
On Aug 16, 2014, at 1:28 PM, "Bruce Beford" wrote:
> I don't believe Wayne meant to imply an RF sensor for the PX3 is under
> development. He was replying to a query about the long awaited sensor for
> the P3. We have been w
I don't believe Wayne meant to imply an RF sensor for the PX3 is under
development. He was replying to a query about the long awaited sensor for
the P3. We have been waiting for one for the P3 for a long time, and there
has been a hole for the connector on the back panel since day 1.
Bruce/N1RX
Wow, Wayne says an RF sensor is in the works for the P3/KX3, how about two to
sense amp linearity please.
K6CG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: m
15 matches
Mail list logo