I think you guys are talking about 2 different products. SDR-IQ is made by RF Space. It's not an LP-PAN. It would be nice to have an in depth comparison between these units. I do know that the IQ has no direction to the K3's comm port and no dedicated sound card but that's about it. Steve N4LQ n...@carolina.rr.com ----- Original Message ----- From: "Gregory Fischer" <a...@cablespeed.com> To: "Bruce McLaughlin" <bmcla...@bex.net> Cc: "'Elecraft Reflector'" <elecraft@mailman.qth.net> Sent: Friday, July 31, 2009 6:55 PM Subject: Re: [Elecraft] SDR-IQ users?
> Thanks Bruce. It didn't but that's because I don't have the K3 > connected directly to the SDR-IQ. > > What I had to do after some trial and error was to go to the USB > device properties and tell it to set up a virtual com port (in device > manager). Then I set LP-Bridge to the same port and restarted > everything. > > Now after a little tweaking of the IF freq and zero-beating with a sig > generator it seems right on and tracks/controls the K3 fine. > > 73 > Greg > AB7R > > > On Jul 31, 2009, at 3:46 PM, Bruce McLaughlin wrote: > >> Start up SDR. Then push the setup button and the cat submenu button >> when it >> comes up. You'll then see a choice of which com port you wish to >> use along >> with the other parameters that are necessary to be set up. That >> should do >> the trick. >> >> Bruce-W8FU >> >> -----Original Message----- >> From: elecraft-boun...@mailman.qth.net >> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gregory Fischer >> Sent: Friday, July 31, 2009 6:16 PM >> To: Elecraft Reflector >> Subject: [Elecraft] SDR-IQ users? >> >> Looking for some assistance in setting up SDR-IQ. I ran the setup and >> connected the IQ and it is receiving sigs from the K3's IF. >> >> The problem is I cannot get it to communicate with the K3 to follow >> frequency changes from the radio....or when clicking on a signal to >> have it change the radios frequency. >> >> I would have thought that after the setup I would find something for >> the SDR-IQ in the device manager but I don't.....no com port setup for >> it or anything. Did I miss a step somewhere? >> >> THanks >> Greg >> AB7R >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html