The approach I've used is to use a couple of BNC to BNC jumpers and a
BNC "T" connector. Connect the RX OUT to one side of the "T". Connect
the RX IN to the other side of the "T" connector. Connect the RSP2 to
the other port on the "T" connector. Then press the RX ANT on the
radio. This
Hi Jim,
You want to look at a wider range of frequencies than the K3 IF
presents. See:
https://www.nk7z.net/sdr-rfi-survey-p1/
for a how to do this, using an SDRPlay radio.
That link goes to part 1 of a multi-part set of articles covering how I
use SDRPlay radios to see just what is
Now that 160 season is almost over and my antenna farm is doing good I'm
going to start chasing RFI at my new QTH.
I plan to use my RSP2Pro with HDSDR to do some time lapse recording to see
when things come and go as a first step.
To do this I plan to use my existing antennas and I'd like to
3 matches
Mail list logo
