Bruce (and others) thank you. I was at 4.39. Now do I feel stupid or what? Tnx all,
73/Gary W2CS >-----Original Message----- >From: elecraft-boun...@mailman.qth.net [mailto:elecraft- >boun...@mailman.qth.net] On Behalf Of Bruce Beford >Sent: Thursday, March 01, 2012 3:50 PM >To: elecraft@mailman.qth.net >Subject: Re: [Elecraft] 144XV with PPL Ref Osc Option > >Gary- >Do you have the proper firmware level in the K3 itself? You need to be >at least as rev 4.42 for this to work. > >>From fw release notes: >MCU 4.42 / DSP 2.73, 8-24-2011 > >* 2-METER FREQUENCY LOCKING TO REF CAL & EXT. REF: >The K144XV RFLK option locks the K3's 2-meter module to the rig's master >reference. Previously, users of this option had to enter offsets in the >CONFIG:XVn OFS menu entry based on how far off the master reference was >from 49380.000 kHz. These offsets can now be calculated automatically >based on the REF CAL menu entry. >If a K3EXREF module is also installed, then REF CAL itself is >automatically calibrated based on an external 10-MHz reference (see >K3EXREF on 2 m, below). > >73, >Bruce, N1RX > > >> Can some one please point me in the right direction? I'm trying to >> calibrate the 144XV with the reference oscillator phase lock option >(ROPLL) >> installed. The symptom is simple. > > > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html