I just noticed that my SWR on 10 M was a lot higher then normal on an antenna, 2.6 to 1 when normal is maybe 1.7 to 1. I used a dummy load to check and SWR was 1 to 1 on 160,80,40,20,15 and 6. But on 10 is was 1.7-1.8 to 1 into the 50 ohm dummy load. I was going to check it on 12M but couldn't remember the exact frequencies but I then noticed the ATU was in on 12M. I turned it off and on then went back to 10M and SWR was normal. I'm 99.8% sure the ATU was not on while in the 10M position. I don't really use it. Anyone else ever run into this? Must have been operator error but I don't know how.
Mike W9RE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
