Download and install FLRig. Setup is straight forward and they support K3 (and
maybe KX3 but since they're all the same command language, K3 should work).
FLRig implements CAT control eliminating the need to use VOX. HTH
73,
Brian, K0DTJ
To those having problems with DATA modes, take a look at the article on
my website www.w3fpr.com. Scroll the left column to the last article
and click on it to open the document.
While VOX should reliably put the radio into transmit, you can set
FLDIGI to use PTT via CAT command - BUT don't
Within FLDIGI there is a transmit audio level control in the lower right
corner. Just below the LK tab. I use a value of -15. The arrows
left and right of the box will increase or decrease the level going to
the radio. My Line Gain which is adjusted by using the MIC knob is
at 30.
I hope someone has solved this, too, as I am having the identical problem with
my KX3. Other digital modes like FT8 work FB. I would like to not have to use
VOX to key the rig. I suspect that I just haven't found the right combination
of trial & error.
Jay K3BH
On Mon, Apr 1, 2019, at 18:53,
Solved it.
In TX DATA mode the MIC level controls the LINE IN Level (dah!). So add
that to your checklist!
Mine was at the default 0. Turned it up and level 5 seems to be the right
amount of drive.
Thanks all.
Brian ve3bwp
--
Sent from: http://elecraft.365791.n2.nabble.com/
I am running into the exact same thing. fldigi gets audio and freq from rig
no problem. USB codec selected for fldigi output but rig just shows TX light
but no power out or ALC indication on rig. Nothing plugged into line in
jack. Rig set to TX DATA. MIC SEL = Line in on rig. Same symptoms with
Mark,
If you are using PTT from FLDIGI, that alone will cause the TX LED to
turn on.
I assume you are using the CODEC in the K3S - if so, do you have
anything plugged into the K3S LINE IN jack? That alone could be the
problem - LINE IN overrides the line out audio from the CODEC.
If the
Can someone provide detailed set up parameters to get the K3s to work with
FLDIGI? I've downloaded the most recent software and can't get the program
to work (e.g., although the "tx" light turns red when I "tune" FLDIGI,
there's no power output from the rig). Otherwise, the program tracks the
8 matches
Mail list logo
