5707 passed the 'alignment and test, part 1' checks with no problem and I'm well into the 'Assembly, Part II' section. I'm at the point of installing C91, C88 and RFC 15 on the bottom of the rf board at U4. The manual talks about a miniature 100 uH choke, much smaller than the other 100 uH chokes and with a tan body. I have 4 green bodied and one tan bodied 100 uH chokes as indicated in the parts list, but the tan bodied one is pretty close to the same size as the green ones, if any thing a little bigger. I'm sure I can solder it to the indicated location, but is this something I should be concerned about?
Thanks for any advice, Bernie Gardner W1AZ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com