You are correct, Don. I too missed that the K3 was being operated remotely.
As I said earlier, if it is possible to change frequency using the keyboard
with HRD then it should be possible to program the PowerMate driver to send
the same keystrokes to HRD, so KTune would not be necessary. The only
Greg,
Thanks for that information. I have not tried it yet, but if KTune
works no matter what window has focus, then that is a big "selling point".
I plan to try it through LP-Bridge.
I am not certain this addresses the original question about use of a
Griffen PowerMate at a remote location, b
b K5WA
>
> -Original Message-
> From: David Ferrington, M0XDF [mailto:m0...@alphadene.co.uk]
> Sent: Saturday, March 20, 2010 10:02 AM
> To: K5WA
> Cc: 'Elecraft reflector'
> Subject: Re: [Elecraft] Slightly OT: Physical tuning knob for K3 through
> HRD?
age-
> From: Mike [mailto:n...@nf4l.com]
> Sent: Saturday, March 20, 2010 10:02 AM
> To: K5WA
> Cc: 'Elecraft reflector'
> Subject: Re: [Elecraft] Slightly OT: Physical tuning knob for K3 through
> HRD?
>
> Bob, what&#x
, 2010 10:02 AM
To: K5WA
Cc: 'Elecraft reflector'
Subject: Re: [Elecraft] Slightly OT: Physical tuning knob for K3 through
HRD?
A Griffin PowerMate (http://www.griffintechnology.com/products/powermate)
allows you to do this with some s/w - not sure about HRD, as Simon.
I use this with M
'Elecraft reflector'
Subject: Re: [Elecraft] Slightly OT: Physical tuning knob for K3 through
HRD?
Bob, what's the advantage of that over the knob ON the rig?
73, Mike NF4L
__
Elecraft mailing list
Home: http://mailman
David Ferrington, M0XDF wrote:
>
> A Griffin PowerMate (http://www.griffintechnology.com/products/powermate)
> allows you to do this with some s/w - not sure about HRD, as Simon.
>
> I use this with MacLoggerDx (and have been for about 10 years) - works a
> treat :-)
>
>
There is a program on
You can sit with the k/b under your fingertips and tune with your arm resting
on the desk, so if your s&p or looking for that rare DX, its less tiring.
73 de M0XDF
Science is a way of skeptically interrogating the universe with a fine
understanding of human fallibility. -Carl Sagan, 1934 - 1996
A Griffin PowerMate (http://www.griffintechnology.com/products/powermate)
allows you to do this with some s/w - not sure about HRD, as Simon.
I use this with MacLoggerDx (and have been for about 10 years) - works a treat
:-)
--
There is no pillow so soft as a clear conscience. -French proverb
Bob, what's the advantage of that over the knob ON the rig?
73, Mike NF4L
K5WA wrote:
> This might be a question for an HRD (Ham Radio Deluxe software) group, but
> since I'm only interested in connecting my K3s, I thought I'd see if anyone
> was on top of this. Does HRD allow some type of encod
This might be a question for an HRD (Ham Radio Deluxe software) group, but
since I'm only interested in connecting my K3s, I thought I'd see if anyone
was on top of this. Does HRD allow some type of encoder input whereby I
could have a "real" VFO knob adjusting frequency rather than using a mouse?
11 matches
Mail list logo
