As usual, Don's advice is excellent. I would add that you should check
to see if there might be a short between pins on one (or more) of the
switches or traces connecting to them. It is EASY to accidentally
splash some solder across solder traces either at the switches, the
microcontroller
Pete,
When you power on, the firmware level is being displayed.
That does not normally occur, but it does display like you indicate IF you
hold one or more buttons down while powering on.
Based on that info, do check to see that all buttons move freely in the
front panel button holes. If you
I am also getting some wierd results on first test. Don recommended a
solder check and I have done this. I have rewetted all the joints on the
control board and display to no avail. I get no "info" messages and
things seem to come up as they should. On switch on I get: "Elecraft"
followed by "2.04P
3 matches
Mail list logo