Hello fellow K3 owners!
I still have some boards available if anyone is interested and I'm
happy to report they work just fine with the KPA3 installed as well!
As my main use for my K3s is 6 meter and 144 EME operation, I bought
the 10 watt version without the antenna tuner. I dabble a
t;
Cc: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] Trying to gauge interest
Count me in!!!
Lew N6LEW
> On Jun 19, 2016, at 11:56 AM, Ken Arck <k...@arcomcontrollers.com> wrote:
>
> Hello fellow 10 watt K3 owners!
>
> As my main use
If you look at the schematics of the KATU, you'll see the chain of
shift registers on the KATU actually sends a signal back to the RF
board. So the CPU sends the command to the KATU and if the ATU
doesn't respond (via the MISO3 line), the CPU interprets that to mean
the KATU isn't present
As
Looks like you can tell the K3(S) that the ATU is installed and the ANT1/ANT2
option is enabled:-)
I might be interested too.
On 6/19/2016 11:34 AM, ab2tc wrote:
Hi,
Is there any reason why this should not work with a K3/100 also? BTW, how do
you convince the firmware that an ATU is
Hi,
Is there any reason why this should not work with a K3/100 also? BTW, how do
you convince the firmware that an ATU is installed? When I press "ANT" on my
ATU-less K3/100 I get the message "NO ATU". If both these concerns can be
put away, count me in, too. I have always been bummed that I
Count me in!!!
Lew N6LEW
> On Jun 19, 2016, at 11:56 AM, Ken Arck wrote:
>
> Hello fellow 10 watt K3 owners!
>
> As my main use for my K3s is 6 meter and 144 EME operation, I bought the 10
> watt version without the antenna tuner. I dabble a little on HF but not a
Hello fellow 10 watt K3 owners!
As my main use for my K3s is 6 meter and 144 EME operation, I bought
the 10 watt version without the antenna tuner. I dabble a little on
HF but not a whole lot. As such, the 10 watt, no tuner version suits
my needs, although I thought it would be nice to be
7 matches
Mail list logo