I have a K3/P3, actually, have KPA500 and KAT500 too but this question is about
my P3.
If I switch to 10-meters (and, there is activity on the band), the P3 shows the
signals and the waterfall for about two seconds. After about two seconds,
there is a change. The waterfall signal disappears
Phil,
That is not normal behavior. Check (by replacement) the BNC cable
between the K3 IF output and the P3. In the past there were a few bad
ones found.
73,
Don W3FPR
On 2/10/2013 4:14 PM, Phil Hystad wrote:
I have a K3/P3, actually, have KPA500 and KAT500 too but this question is about
* On 2013 10 Feb 15:51 -0600, Don Wilhelm wrote:
Phil,
That is not normal behavior. Check (by replacement) the BNC cable
between the K3 IF output and the P3. In the past there were a few
bad ones found.
My IF cable cable between the K3 and P3 can be flaky at times as well.
I've found that
I have noticed when changing to certain bands there is a delay in setting the
new reference level. Several seconds in I hear a relay click in the P3 and
the grass drops down. Does not always do this, or always on the same band,
but often enough that I am accustomed to it and not worried, it is
I see (hear) the same thing, high noise then a a second or so click and my
adjusted reference level. I just assumed that is the design, always works just
a little delay.
73,
Bill
AK5X
On Feb 10, 2013, at 6:47 PM, K7MDL wrote:
I have noticed when changing to certain bands there is a delay
Fred and Bill,
Thanks for your answer -- I think that is probably the issue. I totally forgot
about the ref lvl setting. Of course, that delayed behavior would have still
confused me a bit.
Thanks.
73, phil, K7PEH
On Feb 10, 2013, at 5:54 PM, Fred Jensen k6...@foothill.net wrote:
I
6 matches
Mail list logo
