Re: [Elecraft] VOX / PTT combination on k3

TNX guys, you were very helpful 73 Robert, S57AW On Sun, Dec 20, 2015 at 12:40 AM, Brian Hunt wrote: > I do pretty much what you want to do: use N1MM+ and paddle/external keyer. > > I have: paddle connected directly to the K3; QSK selected; VOX selected; > PTT/KEY set

Re: [Elecraft] VOX / PTT combination on k3

delay works at any speed. Dave Hachadorian, K6LL Yuma, AZ -Original Message- From: Robert Bajuk Sent: Saturday, December 19, 2015 5:28 AM To: elecraft@mailman.qth.net Subject: [Elecraft] VOX / PTT combination on k3 Hi, Simple question... Is there a way to avoid VOX delay on CW mode

Re: [Elecraft] VOX / PTT combination on k3

I do pretty much what you want to do: use N1MM+ and paddle/external keyer. I have: paddle connected directly to the K3; QSK selected; VOX selected; PTT/KEY set to off/dtr; and N1MM+ keying through the serial port dtr line. It gives full QSK to hear other stations between characters. 73,

[Elecraft] VOX / PTT combination on k3

Hi, Simple question... Is there a way to avoid VOX delay on CW mode when PTT is used? To be more concrete: - CW and PTT signal are sent to K3 with N1MM directly from serial port (no external keyer) - external electronic keyer is connected to K3 - VOX is enabled If I want CW keyer to work

Re: [Elecraft] VOX / PTT combination on k3

Hi Robert, If you are using VOX there should be no difference in the delay between using your paddle and using your PC. It sounds like N1MM is still sending a PTT command over the serial link. You can prove this by changing CONFIG:PTT-KEY to OFF-OFF on your K3. 73, Mike K2MK s57aw wrote > Hi,

Re: [Elecraft] VOX / PTT combination on k3

Once you have enabled VOX, you are stuck with whatever delay it imposes. In effect, the VOX and PTT functions are in a logical OR relationship - if either one of them wants the rig to be in transmit, it will be in transmit. In your current setup you could disable computer PTT control entirely