Doug,
Thank you. Please email me as I put in the ones that are too weak. The
idea of the different colors is a nice touch, though, and while mine are
dim, I can tell fairly well instantly if the remote tuner has finished its
job.
73,
Bill
K9YEQ
K2 #35; KX1 #35; K3 #1744; mini mods
A while back someone mentioned that they substituted different colored LED
when they built the W1 watt meter, to make it easier to recognize the power
ranges. Someone else mentioned that the substituted LED's might not be as
bright as those supplied by Elecfraft (which are all red).
Does
they are
received / tested. I'll provide part numbers at that time.
73
Doug, VE3MV
K3 #2432
- Original Message -
From: Tom McCulloch th...@att.net
To: elecraft@mailman.qth.net
Sent: Wednesday, January 21, 2009 10:07 PM
Subject: [Elecraft] W1 Watt Meter
A while back someone mentioned
Subject: RE: [Elecraft] W1 Watt Meter
I made the mod, and it is a nice touch except for one minor problem for me,
the LED's are not as bright as the originals.
73,
Bill
K9YEQ
K2 #35; KX1 #35; K3 #1744; mini mods
-Original Message-
Hi Tom ...
One change I made to my W1 that helps a lot
I made the mod, and it is a nice touch except for one minor problem for me,
the LED's are not as bright as the originals.
73,
Bill
K9YEQ
K2 #35; KX1 #35; K3 #1744; mini mods
-Original Message-
Hi Tom ...
One change I made to my W1 that helps a lot from a usability point-of-view
is to
Hi,
I just ordered and received the W1 Wattmeter and the W1SERKT interface
cable which I'll be using primarily wiyh my K2.
Anything I should know before I begin? Any insights, or experiences you
might provide would be appreciated.
Thanks in advance.
Tom
WB2QDG
K2 #1103
Hi Tom ...
One change I made to my W1 that helps a lot from a usability point-of-view
is to replace some of the red LEDs in the SWR indicator with different
colors. This is because the W1 is small and has even smaller lettering on
the SWR scale. In my installation, and probably most others, it
McCulloch'; Elecraft@mailman.qth.net
Subject: RE: [Elecraft] W1 Watt Meter
Hi Tom ...
One change I made to my W1 that helps a lot from a usability point-of-view
is to replace some of the red LEDs in the SWR indicator with different
colors. This is because the W1 is small and has even smaller lettering
8 matches
Mail list logo