Has anyone used the third party application by W4SMT for the W2 watt
meter on Windows 7?
I was able to install and run it on XP but the application never appears
on Windows 7, it can be seen as a running task in Windows 7 but no way
can I ever get it to appear on screen.
Roger VK3ADE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
. You should then be able to navigate to the
AppData\Roaming folder and delete the W2Prefs file.
HTH..
73, David, W4SMT
--- On Sat, 2/5/11, Roger de Vallero...@genette.biz wrote:
From: Roger de Vallero...@genette.biz
Subject: [Elecraft] [W2} Elecraft W2 Interface program (Ver 1.1.4.12
...@genette.biz wrote:
From: Roger de Vallero...@genette.biz
Subject: Re: [Elecraft] [W2} Elecraft W2 Interface program (Ver 1.1.4.12)
To: df...@yahoo.com
Date: Saturday, February 5, 2011, 11:39 PM
David
I just tried starting the remote rig application before
your
application, I did not however
, IC7000, etc.
Date: Tue, 22 Dec 2009 17:31:03 -0800
From: df...@yahoo.com
To: ayosh...@my.email.ne.jp
CC: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] W2 interface program problem
Okay, I see it. Working on it.
tnx, Aki
David
--- On Tue, 12/22/09, a yoshida ayosh
Bill,
Please define 'stalls out'. On my XP system, it continues to operate even when
it loses focus.
David
--- On Thu, 12/24/09, Bill Johnson k9...@live.com wrote:
David,,
The w2.exe when open on desktop WinXPSP3 stalls out and
loses focus. It eventually comes back. It
would be nice
A YOSHIDA wrote:
(2)When clicking Setup button my K3 repeat transmitting intermittently
untill it opens Ssetup window.
W2 interface program ver 1.0.12.16
W2 FW ver 0.92
-SNIP-
I have the same problem. I'm using W2 FW .93, and interface program
1.0.12.16. I am using a serial to cardbus
I have checked more since then.
This problem has been finally disappeared when PC/RigExpert Plus were
re-booted.
73
aki ja1nlx
eric norris wrote:
A YOSHIDA wrote:
(2)When clicking Setup button my K3 repeat transmitting intermittently
untill it opens Ssetup window.
W2 interface program
I have tested this cool interface with K3 for a while and found following.
W2 is connected with PC via serial port. K3 is connected with PC via
USB interface. (RigExpert Plus)
(1)SWR meter ALWAYS show the last SWR measured. not cleared out.
(2)When clicking Setup button my K3 repeat transmitting
(1)SWR meter ALWAYS show the last SWR measured. not cleared
out.
This problem was fixed in firmware version 0.93. Use the W2 Utility to update
firmware to current version (0.94).
(2)When clicking Setup button my K3 repeat transmitting
intermittently untill it opens Ssetup window.
I
David
Thanks.
(1)Yes FW ver0.94 fix SWR meter problem.
(2)Regarding intermittent transmitting
If plug off USB connector from RigExper Plus unit then the problem
disappears.
So I try to check again with another CAT interface. (microHAM CWKeyer and
microKeyer)
PTT-Key setting does not change
Okay, I see it. Working on it.
tnx, Aki
David
--- On Tue, 12/22/09, a yoshida ayosh...@my.email.ne.jp wrote:
David
Thanks.
(1)Yes FW ver0.94 fix SWR meter problem.
(2)Regarding intermittent transmitting
If plug off USB connector from RigExper Plus unit
then the problem
12 matches
Mail list logo
